TRYING to remove dash tray????

[Rob]

hi all. if you have been thinking of getting the dash tray with the cover ( where the sat nav normally sits) and have had difficulty removing it - here is how: it is not the same as the US type http://www.is300.net/forum/viewtopic.php?t...5447&forum=4&11

click above for pics, to remove ours you need to pry up the tray edge above the air controls with a VERY thin screwdriver ( to avoid damaging the console) there are 2 clips, once that edge is up you can pull the tray out.

Im putting this here as i nearly broke my felt tray!! ( it is screwed down not held by clips)

cheers robbie.

[Steve]

Hi Robbie

Looks like a good feature for the workshop category! :smilegrin:

[Rob]

well if u want i can do it with a few more details, I have a few more " how to remove" etc for the interior ( im finding out as im fitting my parking sensors)

robbie.

[Steve]

that would be great robbie...

would be good to get alot of IS200 stuff into the workshop as the majority of the club owns an IS200/300

my old banger is too rare to even put in the workshop... not many in the UK that is!

[Rob]

no probs steve, ill do it here and then you can move it to workshop and edit the other messages?

robbie.