Do Not Sell My Personal Information Jump to content


Check Engine Light: Which Sensor


SanJoseDriver
 Share

Recommended Posts


Would it be worth resetting the ECU first, to see if that clears it and it goes away for good? Remove EFI and ECTS fuses for 30 seconds (long fuse box under bonnet), reinsert them, leave the key in the "run" position for 6 minutes, turn off and then try starting the car, see if the CEL's gone (and stays gone).

Or just clear the error using the OBD reader that gave you the code in the first place!

Good luck!

Link to comment
Share on other sites

  • 7 months later...

Bank 1 refers to bank that includes cylinder No.1.

Bank 2 refers to bank that does not include cylinder No.1.

Sensor 1 refers to the sensor closer to the engine body.

Does that mean that there are 2 sensors for each bank as the fault is bank 1 sensor 2?

Link to comment
Share on other sites

Cheers guys,

I located the one I need and have ordered the replacement, will fit it myself. Will cost me £64 in total compared to the £310 Lexus wanted :)

I think there may be 5 O2 sensors in total, 1 before and after the pre-cat for each bank and then one after the main cat

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...