Do Not Sell My Personal Information Jump to content


Lexus Headlights Venom Is 200


yasar31
 Share

Recommended Posts

Hi peeps

Looking to buy these venom smoked headlights they have come of an IS200 04 model. The guy that's selling them says they don't fit his IS200 as the lights r a bit more curved near the wings. He says the a guy at lexus said they will fit an import.

Anyone had these headlights b4. Or does any1 know if they will fit an Altezza RS200?

Cheers

Link to comment
Share on other sites


Altezza RS200 and IS200 have the exact same headlight assembly.

So any headlight that fits an IS200 will fit the RS200 (and vice versa).

The only one that does not fit without some "tampering" is the headlight from the IS300. These will not fit the IS200 or the RS200 out of the box.

That said, I have not seen or used this "venom" headlight. The fitting may be off because of how it was designed/manufactured.

Link to comment
Share on other sites

  • 3 months later...
but they will fit with a few mm's of trimming on the inner wing...2 min job

Hey guys.

--New to this club.

I have a couple of questions:

1) How easy is it to remove the orange turn signal line on the factory Altezza headlight?

Is there a thread with pics showing step by step? --I could not find.

2) Has anyone tried fitting an IS300 headlight with HID to an Altezza? I've seen many on sale on Ebay in the US and have been tempted to buy and try. If you can get the headlight to fit, will the HID wiring work assuming the headlight comes with the ballast?

Thanks in advance!

Link to comment
Share on other sites

Hey mate, welcome to the club...

Why don't you just get a set of after-market HID kits? I fitted a set to mine, works a treat & looks savage! :D

http://www.hid-lights.com is where I got mine, GP Thunder are probably the best value for money ones ;)

Thanks for the response.

I've considered the aftermarket HIDs was but was told the reflector on the stock housing would not reflect the HID beam properly. Do you have any issues with yours?

Also, if I keep my original headlight, how easy is it to remove the orange turn signal reflector lense?

Thanks.

Monster-Mat,

Did you have any fitment or wiring issues with fitting the IS300 headlights in the Altezza?

Link to comment
Share on other sites

Hey mate, welcome to the club...

Why don't you just get a set of after-market HID kits? I fitted a set to mine, works a treat & looks savage! :D

http://www.hid-lights.com is where I got mine, GP Thunder are probably the best value for money ones ;)

Thanks for the response.

I've considered the aftermarket HIDs was but was told the reflector on the stock housing would not reflect the HID beam properly. Do you have any issues with yours?

Also, if I keep my original headlight, how easy is it to remove the orange turn signal reflector lense?

Thanks.

Monster-Mat,

Did you have any fitment or wiring issues with fitting the IS300 headlights in the Altezza?

No mate, no problems at all. Beams are focused perfectly (I think) lol

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join The Club

    Join the Lexus Owners Club and be part of the Community. It's FREE!

  • Topics

  • Our picks

    • 10 years of Lexus design: from spindle grille to spindle body
      After 10 years as a defining style feature of every new Lexus model, the famous spindle grille is undergoing a transformation. In tune with a new era of electrified vehicles, the distinctive shape is evolving into a new “spindle body,” as seen on the upcoming new generation Lexus RX SUV and the all-electric RZ.

      The spindle grille has been an unmistakeable Lexus feature since it was first revealed on the LF-Gh concept model of 2011, the basis for the fourth generation GS executive saloon that was launched the following year. Since then, it has been constantly adapted to suit the character of each successive Lexus model, with different mesh patterns, dimensions and finishes.


      Speaking at the time of the grille’s debut, the then Head of Lexus Kiyotake Ise said: “You should be able to identify a car as a Lexus immediately… Instant visual recognition, for example, is the reason behind our spindle grille. It may look aggressive at first glance, that’s intentional, but it also conveys its boldness with sophistication and elegance.”


      It has progressed to become a hallmark expression of Lexus’s L-finesse design, adopted not only for road-going cars, but also incorporated in the futuristic Skyjet spacecraft created for the Lexus-supported movie Valerian and the City of a Thousand Planets and adopted as a design motif in the Loft, the award-winning Lexus and Brussels Airlines lounge at Brussels Airport.


      Today, the original grille concept is the starting point for a more radical application of the spindle shape in which it becomes an integral part of the vehicle’s overall design. This “spindle body” approach is part of the Lexus Next Chapter design for the all-new RX, where the grille is reinterpreted as a seamless unit that flows into the bodywork. The lower section retains a mesh pattern, while the upper section takes in the lower edge of the bonnet; the Lexus emblems sits at the centre of the spindle’s high pinch-point.


      The same concept has been applied to the RZ 450e. As a battery electric vehicle, this requires less cooling than a car with a conventional engine, so the grille has been dispensed with, giving the designers greater freedom. Nonetheless, the spindle shape remains prominent in a central front panel, finished in the car’s body colour. Its impact is heightened by the adjacent frontal areas being contrast-finished in black, the low bonnet line and more boldly shaped front wings.

      On both models, the spindle generates lines that flow back from the front of the car through the bonnet and headlamp units to create a strong and distinctive frontal appearance, reinforcing the brand-defining ambitions of the original concept.
      • 0 replies
    • Lexus joins the UK’s Motability Scheme with the new UX 250h F Sport Design
      From this week, people with mobility needs will be able to access a Lexus vehicle through the UK’s Motability Scheme
      • 0 replies
    • All-New Lexus RX to star at the Venice International Film Festival
      Festival to attract world-renowned actors, celebrities and creatives to the Lido di Venezia from 31 August to 10 September 2022
      • 0 replies
    • The all-new Lexus RZ: powerful design rooted in electrified performance
      Lexus maintains its status as a design innovator in creating a radical look for its all-new, all-electric RZ that directly interprets the SUV’s power and performance
      • 0 replies
    • Lexus guide to interesting EV charging locations off the motorway
      With the Great British holiday getaway on the horizon, drivers of BEVs (battery electric vehicles) will be considering where to recharge on their journey.  While motorway service stations are an obvious choice, Lexus has researched some more interesting alternative locations
      • 0 replies


×
×
  • Create New...




Forums


News


Membership