Do Not Sell My Personal Information Jump to content


Recommended Posts

Now that i have fitted my towbar, i needed to sort out the towing electrics.

Because there is a lamp failure unit on the Side and Stop Lamps i decided to interface them with relays with highish coil resistance.

Decided to interface all functions to the towing Electric Socket with a separate 12v supply , and fuse each circuit independent of the car electrical circuits other than the relay coils.

When i ran the wiring from my touch screen to my laptop in the boot, i also ran two 80amp supplies at the same time for any new projects, made separate blade fuses in the fuse box under the bonnet.

So new project started: - Deigned PCB on my PC and printed a positive on my printer onto clear film, then made the printed circuit, the outcome can be seen, the unit has 7 core cable in an out, with a separate 12v supply to feed the towing socket interface.

Will keep you informed of any further Project on my LS.

http://i85.photobucket.com/albums/k74/syd-...0568_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0564_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0563_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0559_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0555_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0550_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0548_resize.jpg

http://i85.photobucket.com/albums/k74/syd-...0543_resize.jpg

Regard Syd

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...