Do Not Sell My Personal Information Jump to content


Lowering Springs Buying Help!


Recommended Posts


There are so many manufacturers when it comes to lowering springs.

Can someone do a list starting at 1 going down....

1 is the best and gets less crapper when going down.

cheers,

There's a thread on this very page mate by Bulldog about lowering springs :winky:

Link to comment
Share on other sites

i notice the eibach springs lower by 1inch (25mm) in USA for the IS300.

Why do people say it lowers by 30mm when its actual 25mm?

1" = 25.45mm

They round it up so it sounds like a bigger drop than it actually is....

It is in fact 25mm

Link to comment
Share on other sites


i notice the eibach springs lower by 1inch (25mm) in USA for the IS300.

Why do people say it lowers by 30mm when its actual 25mm?

1" = 25.45mm

They round it up so it sounds like a bigger drop than it actually is....

It is in fact 25mm

1" = 25.4mm that rounded up would be 26mm not 30mm, and as Eibach are this side of the pond 30mm would be 30mm and nothing to do with inches.

The septics will round down 30mm to 1"as there is no conventional fraction of an inch that matches 5mm :D

Link to comment
Share on other sites

Doesn't the IS300 have a different spring compression or something anyway to the IS 200? There is a thread on here about this somewhere. With the difference with fitting IS200 springs onto the IS300

Link to comment
Share on other sites

i notice the eibach springs lower by 1inch (25mm) in USA for the IS300.

Why do people say it lowers by 30mm when its actual 25mm?

1" = 25.45mm

They round it up so it sounds like a bigger drop than it actually is....

It is in fact 25mm

1" = 25.4mm that rounded up would be 26mm not 30mm, and as Eibach are this side of the pond 30mm would be 30mm and nothing to do with inches.

The septics will round down 30mm to 1"as there is no conventional fraction of an inch that matches 5mm :D

Let's call it "marketing license" then....

Link to comment
Share on other sites

Doesn't the IS300 have a different spring compression or something anyway to the IS 200? There is a thread on here about this somewhere. With the difference with fitting IS200 springs onto the IS300

Yes, I have IS200 Eibach's on my IS3 ........ and it sits lower than 30mm :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...