Do Not Sell My Personal Information Jump to content


Ack.


Recommended Posts

'llo all.

Was just fitting some new nuts for my new wheels (cheers Chris S for sorting them out) - then, literally, fitting the last one when feel something give (wasn't tightening with too much pressure).

A bolt on the driver's side front has sheared/broken off :crybaby:

Obviously I need to get this sorted asap - anyone got any idea what the cost (ballpark) is going to be so I can brace myself?

Link to comment
Share on other sites

'llo all.

Was just fitting some new nuts for my new wheels (cheers Chris S for sorting them out) - then, literally, fitting the last one when feel something give (wasn't tightening with too much pressure).

A bolt on the driver's side front has sheared/broken off :crybaby:

Obviously I need to get this sorted asap - anyone got any idea what the cost (ballpark) is going to be so I can brace myself?

Sorry to hear that mate. It's only couple quid - up to 5 I as far as I remember. It is very easy to fit as well - just knock the old one out with a hammer and fit the new one from the other side - just push it in. Job jobed :)

Good luck

Tazzz78

Link to comment
Share on other sites

Yeah very easy, just as above.

I found this out when fitting my new discs, hit the stud with a hammer by mistake, thought I had broke it off and needed a new hub at first. Just poped back in from behind.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...