My Valeo Hi-beam Projectors

[skeet94]

Both projectors sitting on the paper wrapping they came packaged in...

The actual lens / front of the projector

Picture of the sheild which will be modified so the cutoff looks like ____/----- for RHD use instead of how it is now

-----/____ otherwise you'll end up dazzling oncoming drivers.

Photo of both projectors disassembled with the reflector bowl showing on the rear half pieces.

I'll keep this thread updated as and when I get my Valeo Projectors with more pictures, and when I get around to retrofitting will definitely post up a "guide" on how to do this EXCELLENT mod!

Keep an eye out - although it may be a few months yet, till I finish the whole thing.

Mitul.

EDIT: I actually thought these were the Valeo's but in fact are the TSX (Accord Type R) projectors ... THESE PICTURES ARE OF THE HID LOW BEAM'S AND NOT THE VALEO'S.

After having done a colour mod this is the kind of output I am expecting - http://www.hidplanet.com/forums/viewtopic....ight=tsx+shield

The beam intensity just blows the stock reflectors out of the water.