Do Not Sell My Personal Information Jump to content


Next Question


Recommended Posts

Sorry but my minds working overtime on things to do :whistling:

Next question

The sport rear spoiler shown below

gallery_1633_40_1102249431.jpg

would the bolt holes match thos of the accssory spoiler (below)

gallery_1236_18_7537.jpg

Link to comment
Share on other sites

Sorry but my minds working overtime on things to do :whistling:

Next question

The sport rear spoiler shown below

gallery_1633_40_1102249431.jpg

would the bolt holes match thos of the accssory spoiler (below)

gallery_1236_18_7537.jpg

If its bolted on Chris, as you know i got my car new from lexus stockport, and the rear spoiler was just bonded on, with no holes at all :o

Link to comment
Share on other sites

sorry chris i honestly couldnt tell you - it would be nice to assume they are but without measuring them who knows.......

oooohhh hold on doesnt the larger spoiler have 2 bolts on the ends instead of 1??

Link to comment
Share on other sites


i seem to remember someone on here swapping the spoilers over and the holes were different or they didnt want to risk the chance of a respray so just swapped boot lids with another member.

Link to comment
Share on other sites


the sport spoiler is bolted and bonded on

it will not come off without a lot of mess and a possible respray of the bootlid

it is also unlikely to come off in one piece !

been there tried it :whistling:

Link to comment
Share on other sites

sport spoiler looks better in my opinion

in regards the holes, on the underside of the bootlid, there is only 3 points that you would be able to access the outer skin, or in this case a point at which you would be able to affix the spoiler, so, id assume that the spoiler both have the same fixing locations

Link to comment
Share on other sites

Hey Chris,

I recall when I put my spoiler on, that I bolted them on in 3 places, plus 1 larger hole to run the wires for the LED.

So at a minimum, I'd guess the sport spoiler has 1 hole where the brakelight wires are being run from, even if the rest of it was bonded on without bolts.

If these coincide with the high level spoiler, you'll be fine :)

Link to comment
Share on other sites

been to look at this one earlier and its another lemon, so back to the drawing board

You'll find one!! Stay on the hunt, there's still a few good examples of this car out there!

Flat spoiler has a load of screws holes ... think i drilled around 6 or more and has thin double sided tape as well...

Yup, I doublesided taped mine also and a bit of silicone sealent... (in addition to the bolts) mainly to protect it from water intrusion and rusting etc...

Link to comment
Share on other sites

wants too much work

theres holes in the dash where a phone has been

it needs a rear bumper as someone has put horrid looking parking sensors on

both headlamps need changing as they are scratched

and every door moulding has damaged to them so they need replacing.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...