Oxygen Sensors Gs300 Mk1 '95

[Fire99]

Hi All,

Hopefully you can answer a question for me on something i may have overlooked.

I have a '95 GS300 Sport with 113k on the clock and i decided to change the Oxygen Sensors after hearing how they can make quite an affect on fuel mileage etc (and mine is pretty awful)

Anyway i found my sensors are 1 wire ones so ordered a pair to go on the exhaust manifolds.

After removing the heatshield i found the old sensors are held in by a flange and two bolts where the new ones have a 22mm nut which screws in..

Do i have to buy special sensors with flanges (which i couldnt easily find) or can i adapt the ones with the 22mm nuts?

Any advice would be greatly appreciated asap as i need to know whether to send the sensors back..

thanks all,

Nick

[black 300sport]

Sounds like you brought the wrong ones.Go to lexus with your reg or chassis no. and see what they say

[TigerFish]

Or you might need something similar to the flange adaptor shown in this page clicky

flange kit is available on this link clicky

[Fire99]

Or you might need something similar to the flange adaptor shown in this page clicky

flange kit is available on this link clicky

thanks mate.. yep its the flange kit i need.....

oops!