1999 Gs Sport

[norlec]

Hi Guys

I need to replace my headlight washer actuator has any member done one if so could you advise the best way to remove and replace.

Cheers

Norman

[k33rjd]

for this you will have to remove the front bumper. this is done by removing-

the clips holding the inner wing liners

the 2x ten mm bolts holding the top corners of the bumper

the 10mm bolts that run along the bottom of the the bumper

and the clips and 10mm bolts near the grill

the bumper should be able to be removed, becareful of wires from parking sensors (if you have them) and the pipes for you headlight washers, these should be disconnected and then you can get to what you need very easily.

[norlec]

for this you will have to remove the front bumper. this is done by removing-

the clips holding the inner wing liners

the 2x ten mm bolts holding the top corners of the bumper

the 10mm bolts that run along the bottom of the the bumper

and the clips and 10mm bolts near the grill

the bumper should be able to be removed, becareful of wires from parking sensors (if you have them) and the pipes for you headlight washers, these should be disconnected and then you can get to what you need very easily.

Great stuff

Thanks very much for your help

Norman