Do Not Sell My Personal Information Jump to content

Question From A Mr2 Owner Regarding Is200 Alloys


Recommended Posts

Hi all

Hope your all doing good.

I have the following 17" alloys on my MR2 Turbo (they came with the car!):

Reading your sticky above (and just wanting to confirm) am I right in thinking that I can go to 245/45-17 on the back and run 215/40-17 at the front no problems on these wheels?

I'm assuming that these are 7J's (stock 5 spoke 17" IS200 alloys as above pic)

Cheers guys, really appreciate your help

Link to comment
Share on other sites

Hello matey, welcome to the club :)

The wheels in the pic above are the stock IS200 rims 7j 17" et50, The wheel/tyre guide on here states a 45 offset? but on the 9 is200 wheels i have here they all say et50 on the rear? ;)

215/40/17's will fit no problem but not sure if the 245's will be a bit wide? if they were 7.5/8" you might just get away with it? :unsure:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...