How Do You Remove The Headlight On The Ls430

[sparkyhx]

as it says - last night I made a right hash of changing a bulb, resulting in me deciding it would be easier to remove the whole headlight assembly than to continue fiddling - I removed the two obvious screws but found that it was still 'connected' somewhere around the wing.

In the end I managed to solve the problem without removing the headlight, but was wondering how you do it for future reference.

[steve2006]

Have a look here ( sorry didn't see your year but this is for a 2003 model probably the same if not enter your year and body type)

http://www.toyodiy.com/parts/p_E_2003_LEXU...EAGKQ_8101.html

[Malc]

Have a look here ( sorry didn't see your year but this is for a 2003 model probably the same if not enter your year and body type)

http://www.toyodiy.com/parts/p_E_2003_LEXU...EAGKQ_8101.html

Hi, I am reliably informed that changing a headlamp bulb in this age car is quite challenging. Typical garage cost is @ £500 ( yes five hundred pounds ) per side and little of that is the bulb cost. And if the " motors " are defunct then the cost escalates to @ £750 per side.

The older models without Xenon bulbs are ( hopes ) less demanding.

[steveskeggy]

http://bahamutcars.free.fr/workshop/LS_01-...ents/index.html

Repair Manual ( - 2003.7 ) / Body / Headlight / Removal

Page B0-8

as it says - last night I made a right hash of changing a bulb, resulting in me deciding it would be easier to remove the whole headlight assembly than to continue fiddling - I removed the two obvious screws but found that it was still 'connected' somewhere around the wing.

In the end I managed to solve the problem without removing the headlight, but was wondering how you do it for future reference.

[sparkyhx]

http://bahamutcars.free.fr/workshop/LS_01-...ents/index.html

Repair Manual ( - 2003.7 ) / Body / Headlight / Removal

Page B0-8

as it says - last night I made a right hash of changing a bulb, resulting in me deciding it would be easier to remove the whole headlight assembly than to continue fiddling - I removed the two obvious screws but found that it was still 'connected' somewhere around the wing.

In the end I managed to solve the problem without removing the headlight, but was wondering how you do it for future reference.

Wow - Fantastic link - Looks like I just needed to 'tug a bit harder'

- warning only works with IE not firefox.