Sign in to follow this  
Saraj

Supercharger On Ebay

Recommended Posts

 

Though:

This kit has been seen to make a realistic 380hp on a lightly modified motor.

Lightly modified i dont think so, no mention of the need for rods etc.

It comes with all hardware parts required including exhaust system and manifold

Theres also no induction kit, intercooler or inlet pipe work so they're right it'd fit but to run you need a lot more. also its only a little thing but theres no return line for the BOV's to the exhaust so you'd have to leave them open and block the hole off.

Share this post


Link to post
Share on other sites

Though:
This kit has been seen to make a realistic 380hp on a lightly modified motor.

Lightly modified i dont think so, no mention of the need for rods etc.

It comes with all hardware parts required including exhaust system and manifold

Theres also no induction kit, intercooler or inlet pipe work so they're right it'd fit but to run you need a lot more. also its only a little thing but theres no return line for the BOV's to the exhaust so you'd have to leave them open and block the hole off.

The induction kit is included, Yes there is no intercoolerand pipework or intercooler , The return line for the BOV is also included also included is the special crankshaft pulley designed to drive the Rotrax , The aircon bracket is also included , All these are needed as the belt set up was configured differently so in a short note the kit is comlpete , Pl note you will nead internal's and management includeing injector's if this kit is to go on an IS 200 , That's not to say the charger cant be fitted to any other application .

Share this post


Link to post
Share on other sites

It does look like you get quite a lot with it, e.g. all the exhaust bits (is that a sports cat ? I can't work out which bit of the exhaust is shown there) as well as a manifold.

Bear in mind that it's a starting price, not a "buy it now" price, but still seems quite a lot of kit.

Surely you'd need some electronics to run it though, e.g. an FCD at a minimum but would an FCD be enough or would you need a full piggy-back ECU ?

Share this post


Link to post
Share on other sites

as Stav said it doesnt ention rods and piston needs to be upgraded. juat says lightly modified wihcih costs alot :lol:

Share this post


Link to post
Share on other sites

Though:
This kit has been seen to make a realistic 380hp on a lightly modified motor.

Lightly modified i dont think so, no mention of the need for rods etc.

It comes with all hardware parts required including exhaust system and manifold

Theres also no induction kit, intercooler or inlet pipe work so they're right it'd fit but to run you need a lot more. also its only a little thing but theres no return line for the BOV's to the exhaust so you'd have to leave them open and block the hole off.

The induction kit is included, Yes there is no intercoolerand pipework or intercooler , The return line for the BOV is also included also included is the special crankshaft pulley designed to drive the Rotrax , The aircon bracket is also included , All these are needed as the belt set up was configured differently so in a short note the kit is comlpete , Pl note you will nead internal's and management includeing injector's if this kit is to go on an IS 200 , That's not to say the charger cant be fitted to any other application .

so is lexlover001 part of spc then??

wasnt this a big debate before?

:shutit:

Share this post


Link to post
Share on other sites

i see the add has been updated but there is no mention of the other modifications on the add that would be required and states "It comes with all hardware parts required" but then says it doesnt come with intercooler so surely this is wrong it doesnt have all parts :wacko: , even if you got the kit and an intercooler and bolted it on its gonna cause problems is it not....

i can see some un expecting buyer having problems here unless they know the club and this post where these items will get covered and explained

Just my 2 pence worth

Rabs

Share this post


Link to post
Share on other sites
Though:
This kit has been seen to make a realistic 380hp on a lightly modified motor.

Lightly modified i dont think so, no mention of the need for rods etc.

It comes with all hardware parts required including exhaust system and manifold

Theres also no induction kit, intercooler or inlet pipe work so they're right it'd fit but to run you need a lot more. also its only a little thing but theres no return line for the BOV's to the exhaust so you'd have to leave them open and block the hole off.

The induction kit is included, Yes there is no intercoolerand pipework or intercooler , The return line for the BOV is also included also included is the special crankshaft pulley designed to drive the Rotrax , The aircon bracket is also included , All these are needed as the belt set up was configured differently so in a short note the kit is comlpete , Pl note you will nead internal's and management includeing injector's if this kit is to go on an IS 200 , That's not to say the charger cant be fitted to any other application .

so is lexlover001 part of spc then??

wasnt this a big debate before?

:shutit:

Hush hush redz you will get your self in trouble like other members on here :P

Rabs

Share this post


Link to post
Share on other sites

stav even got his name mentioned in the add,

you should ask fora percentage for using your name

Share this post


Link to post
Share on other sites

Though:
This kit has been seen to make a realistic 380hp on a lightly modified motor.

Lightly modified i dont think so, no mention of the need for rods etc.

It comes with all hardware parts required including exhaust system and manifold

Theres also no induction kit, intercooler or inlet pipe work so they're right it'd fit but to run you need a lot more. also its only a little thing but theres no return line for the BOV's to the exhaust so you'd have to leave them open and block the hole off.

The induction kit is included, Yes there is no intercoolerand pipework or intercooler , The return line for the BOV is also included also included is the special crankshaft pulley designed to drive the Rotrax , The aircon bracket is also included , All these are needed as the belt set up was configured differently so in a short note the kit is comlpete , Pl note you will nead internal's and management includeing injector's if this kit is to go on an IS 200 , That's not to say the charger cant be fitted to any other application .

so is lexlover001 part of spc then??

wasnt this a big debate before?

:shutit:

Hush hush redz you will get your self in trouble like other members on here :P

Rabs

:lol:

Share this post


Link to post
Share on other sites

This was pretty darn fast on Dave's car to put it mildly, what happened to Dave's original engine as that had

forged internals and would have been an easy swap over,or is that the same engine now that is being Turbo'd ?

Edited by janey
Quote prior to editing

Share this post


Link to post
Share on other sites

how come post are being removed from this thread...........

where has redz post gone and mine

can i plase be informed as to why my post was removed

Rabs

Share this post


Link to post
Share on other sites

dunno..

what happened to lexlover001?? conspiracy theory!!!

Share this post


Link to post
Share on other sites

i think this ANTI freedom of speech thing is in action again

DO AS I SAY NOT AS I DO

surely if things are being removed the individuals should know why......

this is not the thread going off topic nor any sladerous coments or accusations so why were they removed perhaps the person involved in this can own up and let us know or is there this underground structure and rules we dont know about

annoyed Rabs

Share this post


Link to post
Share on other sites

I think trading was the reason for Lexlovers disappearance from this thread, dunno why

Redz comments went tho :whistling: nor my reply to him ?

Share this post


Link to post
Share on other sites

Certain posts were removed due to the fact that they were quoting Lexlovers post which was removed due to him breaking club T & C's

Share this post


Link to post
Share on other sites

oh,

so has it been confirmed that lexlover is officaly spc then?

wasnt that your point all along wozza??

Share this post


Link to post
Share on other sites

i didnt think lexlover was trading in the thread but maybe his friends feared that it would be seen this way so launched this cover up which now makes us more suspicious of the underground rules

maybe the mods or admin that did this would clarify there reasons or is is it beacuse (they can again) after all it is saraj's thread themind boggles

Still annoyed

Rabs

Share this post


Link to post
Share on other sites

so does this mean Lexlover has been trading prior then and is connected to SPC if so wozza was right in a previous thread........

Rabs

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this