Is200 Parking Sensors

[sinclair]

Hi guys, been a while since ive been on here.

I am due to have my rear bumper sprayed and thinking (if possible) of putting parking sensors in beforehand. I was wondering if there is any wiring for it to be tapped into as it already beeps when in reverse.

Any suggestions welcome.

Craig

[Talisker]

The beeping when you are in reverse is just to let you know that you're in reverse. Most aftermarket kits have their own speaker and ecu etc. The only wires you may have to find are a postive feed and an earth return to power the kit.

[Parthiban]

Parking sensors usually just wire into the reverse light feed so they are activated when in reverse.

[sinclair]

Ok, so it's just going to be an indipendent system then. Thanks for the replies.

Shame it can't be intergrated into the loom somehow.

[Parthiban]

Ok, so it's just going to be an indipendent system then. Thanks for the replies.

Shame it can't be intergrated into the loom somehow.

Not sure if it has to be that way, but it's definitely the simplest way.