Do Not Sell My Personal Information Jump to content


Recommended Posts

Hi all,

Am looking for suspension bushes and am hoping not to have to go to the main dealer..................

1997 Lexus LS400

1) N/S/R top arm from wheel to rear subframe (2 bushes), but may be only available as unit with ball joint.

2) O/S/R rear bush on hub connected to anti roll bar

Can anyone undertsand my lack of mechanical knowledge?!

Help please

Kindest regards

David

Link to comment
Share on other sites

Hi all,

Am looking for suspension bushes and am hoping not to have to go to the main dealer..................

1997 Lexus LS400

1) N/S/R top arm from wheel to rear subframe (2 bushes), but may be only available as unit with ball joint.

2) O/S/R rear bush on hub connected to anti roll bar

Can anyone undertsand my lack of mechanical knowledge?!

Help please

Kindest regards

David

Try THIS guy or THIS guy.

Good Luck.

Link to comment
Share on other sites

Hi all,

Am looking for suspension bushes and am hoping not to have to go to the main dealer..................

1997 Lexus LS400

1) N/S/R top arm from wheel to rear subframe (2 bushes), but may be only available as unit with ball joint.

2) O/S/R rear bush on hub connected to anti roll bar

Can anyone undertsand my lack of mechanical knowledge?!

Help please

Kindest regards

David

PRI Racing do the bushes.

You can measure the bush you have to make sure the size over the phone.

http://www.priracing.com/section.php/268/1/ls400

I know the listing is for a 1990 to 1994 but just measure the hole and they can match it up with all the ones they do. Your ls400 fitment will always be the same as another toyota. I found out last week that the ls400 early rear anti roll bar is the same as the MR2 model, Super thin.

Link to comment
Share on other sites

I did the rear wishbone, inner, upper bushes on my 1995 car, and used 90-94 bushes by ASUS, from LDP Autos on eBay.com.

They are called "bushings" in the US, rather than bushes.

Car drove so much better afterwards.

It was not a simple job, but I did it on the drive way ok.

Link to comment
Share on other sites

Hi all,

Am looking for suspension bushes and am hoping not to have to go to the main dealer..................

1997 Lexus LS400

1) N/S/R top arm from wheel to rear subframe (2 bushes), but may be only available as unit with ball joint.

2) O/S/R rear bush on hub connected to anti roll bar

Can anyone undertsand my lack of mechanical knowledge?!

Help please

Kindest regards

David

Try THIS guy or THIS guy.

Good Luck.

Thanks and sorry for slow reply - forum is great!

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...