Do Not Sell My Personal Information Jump to content


Recommended Posts

Check the water control valve on the bulkhead in the engine bay. You will see it almost inline with the engine, with a pipe going in the bottom and out the side. There is a cable clipped to it. If the cable is not clipped on, or is incorrectly aligned, you will get no hot water through the matrix. You can test by unclipping the operating cable and moving the armature by hand to see if the porblem rectifies itself. Also check that the cable moves when you adjust the temp on the control unit.

Link to comment
Share on other sites

yeah thanks but the part you mention is brand new it does move but i will check it again

If it has just been changed, then it is more than likely that the cable has not been clipped on and adjusted correctly.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...