Anyone Know Where I Can Get 66.1Mm To 60.1Mm Spigot Rings?

[George Murray]

I've put a deposit down on a set of super rare, super lightweight alloys imported from Japan to put on the IS200, but i have a problem. The centre bore is 66.1mm Nissan spec, and i need 60.1mm for the lexus. However, i can't seem to find any spigot rings that will fit. I can find 67.1mm to 60.1mm, but these will be too big. Can i buy a set and get 1mm machined off? If so, should i be going for metal ones?

Only other option is getting a set custom made :(

[jay_russell]

i can order them and post them to you, we have them here at work but i live in sweden so let me know

but there is a set on eBay

http://cgi.ebay.co.uk/Set-Spigot-Rings-Reduce-bore-size-67-1-60-1-/160573018598?pt=LH_DefaultDomain_3&hash=item2562e5d1e6

[steve2006]

The eBay ones are 67.1 not the 66.1 which George needs.

The company linked below claims they can get any size so may be worth a try.

http://www.performancealloys.com/orings.aspx

[George Murray]

Cheers for the replies

Jay - The ones you have listed are 67.1, not 66.1

Steve - Can't enter 66.1 or 60.1 into that website, they are not options unfortunately

Looks like i'll have to go custom. I know a company who can make them, but they'll be £19.99 a set

[steve2006]

Yes I also entered your dimensions and found the same but lower down they say they can supply for any wheels and car,having said that £19.99 is not bad for a custom set.Are they metal or plastic for that price? Also post up a picture of the wheels when you have them.

[George Murray]

Plastic i think Steve. Should have the wheels some time next week

[jay_russell]

sorry mate i miss read the post, i can get a set of 66,1 to 58,6 and then you can sand them down to make them 60,1

[George Murray]

Thanks for the offer, but i'd rather have something with the correct measurements, rather than sanding down and using guesswork

[George Murray]

All sorted now :)