Rx300 Body Roll

[DDow]

I have just bought my first Lexus, and hence this is my first post.

I am very pleased with my 2005 RX300 SE Nav with 57000 miles on the clock. It will not be used off road. (Non air suspension)

It does seem to roll a bit on corners and I am sure I will soon get used to it. I understand this is because of the type of vehicle it is, and its height etc, but I have noticed that there are one or two uprated anti-roll bars for sale on the net. Has anyone had experience of these ? Would you need front and rear or would just the rear be of any use ?

Presumably this would not affect any wheel geometry and is easily removed for resale.

Thanks for your help

Regards

DD

[Boxbrownie]

You MUST fit uprated ARBs as a pair, fitting just front or rear separately will cause either increased oversteer or understeer and possibly to a degree that will make the vehicle unstable.

[Tony-Bones]

As above and no the geometry will remain the same with new bars fitted.

[Boxbrownie]

BTW, good luck finding an ARB kit for the RX, I have looked high and low and still not found anything. I thought Eibach or H&R would have done them but I cannot find them.

It would indeed be nice to just tighten up the corner roll a little.

[sendz]

http://item.mobileweb.ebay.co.uk/viewitem?itemId=290783858395 I have been thinking about uprating the springs on my 400h for the same reason. Has anyone on here fitted the eibachs?

[Boxbrownie]

Link is not working...........was it a source?