Is350 Caliper Upgrade

[toffee_pie]

has anyone put meaty is350 calipers on the 250? looks like something i would like.

They can fit stock 17" alloys but need new discs, and dust shield.

[Dean8788]

I would be interested in this also.

[Alex Coul]

I'd be up for this, probably been done a lot in the states. Sure I read somewhere brakes from a GS fit and are a big improvement

[Exdee]

I did research on this and have compiled the following list of parts. Also, there were two TSBs in USA where parts were changed to combat squealing issues and I have used the updated part numbers from them.

0446530450 - Low Dust Pads

0494530330 - Anti Squeal Shims Kit

0494722070 - Anti Rattle Caliper Clips

4773550020 x 2 - Sliding Pins

4773022460 - Caliper Drivers Side

4775022460 - Caliper Passenger Side

4778122200 - Brake Dust Shield - Drivers Side

4778222200 - Brake Dust Shield - Passengers Side

4351230350 - Brake Disc - Drivers Side

4351630040 - Brake Disc - Passenger Side

It's just a matter of going to the dealer now to get a quote. I'll probably pop in at some point this month but feel free to beat me to it...

[Alex Coul]

Are you in the US Exdee?

[Exdee]

I wish. I live in London. :)

[Alex Coul]

Will their part numbers work here?

May need to order from the states, unless you have the GS part numbers?

[Exdee]

The part numbers are the same for both the GS and the IS350.

I can get these from the USA for £800ish but I would like to check locally too before I proceed.

[Alex Coul]

Awesome!

[ChumpusRex]

Are you sure they fit on a 250?

I think the hub attachment is different on the 250,so the caliper sticks out and will foul 17" wheels.