bob woody

thanks for the reply guys only pride hurt ,car as already gone,it was p regd 1997 towbar about 3 years old thanks again bob

sad day written off my LS400 .if anybodys interested removed towbar before she went away. rather one of you guys had it at decent price than put it on ebay thanks bob

hi just seen your request i have 1 off my gs300 m regd email me at bobrouk @ yahoo .co.uk for more info thanks

sorry u moveing on to rover, hope u wont be sorry, repaired a few of them, i think they are xxxx, all the best

had a gs 300 m regd wheels would not fit my ls 400 p regd hope it helps

thanks steve if its hard to do is it hard to find

hi sir john already welded cats to y pipe it sounds to blow from manifold when cold and then goes quiet when warmed up?

Hi Bob and welcome. Have you tried searching this forum? Bottom left of this page. Look carefully at the results as the contents may include links to tutorials and to members who don't make regular postings. thanks steve i will do a search Not sure if the 96 model has the same "fault" as the earlier ones. If so there is a known weak point at the flanges between the cats and the 1st part of the stainless steel system. The flanges seem to be made of mild steel and rot out where they meet. If they arent too bad you can put new gaskets in (about £5 each) a bit of plastic metal and new bolts. Failing that, if they are really bad, you could try welding the cats to the "Y" pipe. Apparently it works quite well. Good luck and let us know how you get on. PS. the flanges on mine are well knacked. I have to do mine(plastic metal) every 4 months. But it lasts longer if i dont floor the accelerator too often.

dewsbury auto salvage know them well be sure you get right part because they only give credit back on another part and no refund

Hi Bob and welcome. Have you tried searching this forum? Bottom left of this page. Look carefully at the results as the contents may include links to tutorials and to members who don't make regular postings. thanks steve i will do a search

hi everybody have a blowing manifold gasket on my 96 ls 400 how hard a job to do anybody know thanks for any help

towbar of gs300 mki had to scrap car towbar bought from new a few years ago but seldom used open to offers if anyones interested