Alternet

are your deelife sensors compatible with the stock system or do you have to deal with the dash lights being on due to not having compatible TPMS sensors? Do you have a link to the ones you use?

How did you manage to get them to work if the app only works with the teyes sensors?

I'm not @ahmed24... but it sounds like you do not have the canbus connected or you have the wrong one selected in the software. verify that you have the canbus box connected at both ends and plugged into the correct port on the back of the CC3. If you do then check to make sure you have the correct canbus settings. if you go into the model select in the CC3 canbus app it will show you what settings you need to select. Also have you turned on A/C information in the factory system menu? https://teyes.com.au/pages/settings-a-c-display

ok good to know. i will install the wired OBD connector that came with the unit. Also in my kit the wire connected to G5 (the reverse trigger) goes from G5 right into the harness/plug that plugs into the canbus adapter. I did disconnect the wire and connect it to the reverse light via the camera harness to get it working. I originally assumed it was a canbus thing because the G5 trigger wire goes directly to the canbus adapter.

My car is an 07. I have Teyes wireless bluetooth OBD reader connected currently I have tested it with an OBD reader program and it seems to read from that... but i still see no door info. Should I use the wired OBD connector instead?

@ahmed24 another question for you. I noticed that my car doesn't go to the reverse cam when i put my car into reverse and doesn't indicate when my doors are open and stuff. It does show info from canbus though and it does control my air con, so i know my canbus stuff is wired correctly. What are your canbus settings? does your unit show your back up cam when you put your car into reverse? does it show when car doors are open and stuff?

@ahmed24 nm i found it. it looked like something else at first. i wish we could delete posts on this forum.

@ahmed24 Do you know how to turn on rear defrost? I have had this thing for a week now and i just noticed my unit (because i was non navi) does have a button on the front for rear defrost.

@ahmed24 another question you might know. is there a way to see the tire pressure data or do you have to buy the addon sensors for that? I would assume that data is available via canbus but unsure if the CC3 can read it.

so there is no way to get them both to control the same volume? i tend to use both depending on how much (or how fast) i want to change the volume

oh and does the CC3 screen need a screen protector!? cant forget to ask that.

I have a few more questions if you don't mind (as you seem to know a lot about these). Or if anyone else may know the answers... Do you know if there is a way to make this app come up when you press the climate control buttons instead of the bottom screen pop up? Or is there a way to put a short cut to this on the main screen? I know its nit picky and won't keep me from ordering the CC3, but Im just curious if its possible. How does the screen do in super cold whether. It regularly gets to -40C (-40F) here in winter. Will the screen be usable still or will it just glitch out or be too frozen up to use? (i plan to get the 2k screen upgrade as well if that makes a difference) Also does Teyes ever have any sales? Last thing I want to do is drop this amount of money and 2 weeks later it goes on a big sale or something lol.

Hello, I'm looking at getting a CC3 for my 07 non nav Is250. Can anyone with the 10" model tell me if there is a standalone climate control app or is it just the bottom screen pop up shown earlier in this thread. Also in the bottom screen pop up shown earlier in the thread it doesn't seem to have the filter cabin air button. Can anyone tell me if the CC3 has this function for the 10". The 9" for the cars with navi seem to have it but i cant see any indication the 10" has it. (please see attached picture for reference)

what kinda problems???