Sheeldzy

I've been collecting parts to do this swap, probably start the job next year. Still not got the actual engine yet though... hmmmm

http://www.lexusownersclub.co.uk/forum/ind...showtopic=65654 buy mine

That's mine http://www.lexusownersclub.co.uk/forum/ind...showtopic=65654

Got around to loading up some pictures of my car finally, but only because it's up for sale here... http://www.lexusownersclub.co.uk/forum/ind...showtopic=65654

Or mine black y reg with 73k se, 12months tax, MoT october, loads of dealer history and lots and lots of reciepts, recently had all belts, spark plugs, 4 tyres, ac re-gas, both bottom ball joints, 2 full sets of wheels (only 5 tyres), tracked to WiM spec, HID headlights, colour coded and decaled brake calipers, sports grille, colour coded head lights, colour coded all 4 fog lights, late spec dark chrome rear lights (comes with original chrome rear lights and standard red rear fogs as spares), all 3 keys, stainless steel dial kit and a/c rings. £4,200

much better value :D

Mine is for sale...

Think I'm getting better mpg on long runs than before charging

Put a silica gel sachet in the back of it

Yup, as above. Mine did similar things, put an FCD on it and all is well.

Makes me want to take mine off and crack out the polish

Scrap value, probably

Get it to a good bodyshop so they can get it on a jig and see what it is that you've bent. I had a similar experience but didn't bend anything on inspection. However in a few hundred miles the wheel bearing started howling away and the anti-roll bar drop link went too.

Valve stem oil seals usually from cold start up is my experience for most engines but this isn't something you'd expect really. How many miles has the car done?

Nice idea, they work off the door switch or just on constantly?

Stainless steel dial kit?

Now that is nice! i'd have that on my car anyday! They look the the V2 Dare wheels on that Lex Those wheels are very popular on a lot of non-mercs. Many an astra vxr has a set of them underneath it.

I use Forte all the time, which is supposedly the industry standard. Never done any harm. But I get it free. My emissions had improved on the gas analyzer at MoT time after 12months of the stuff (one every two months or so).

If it feels like it's not gonna come it's better to put it back in again for a little longer I found as the grey headlight back softens and bends out of shape if you try to force them apart with a screwdriver etc. Also recommend clear silicon sealant after you've baked them back together. If you find they do mist up a packet of silica is usually a good bet.

10mins at 100 degrees celcius for headlights and about 7mins for fogs in a pre-heated oven worked for me. That sounded a bit Delia Smith.

Just came today, really happy with them. Thanks again

I want that camber real bad

Was just after a pic before you send them mate, sure they'll be fine though ;) ???? Pic ???? Did you get my PM buddy, i haven't finished your dials as i need to know what centre piece you wanted. Jason :D Yeah, I replied. Thought you'd already started them and realised they had the L in the middle, so I said to send a pic so I could see what it looked like? Think I've got the wrong end of the stick here. I'll take which either mate, just what is easiest. :) Never got a message back mate The set i had made up for you has the lexus logo in the middle, not the lexus text like the picture shows. There is a picture on the first page showing one with the lexus logo on it. As i have this version its easier to get this version sent out. If you are not happy then let me know and i will replace the centre section. And as promised i will refund £10 mate for the wait and confusion casued on my half. Sorry for the long delay and they WILL be in the post tomorrow, although they may take a while with the strike's. They will be sent 'Special delivery' though to ensure that they do get there asap after the strikes! Jason :D Thanks a lot mate, I'm sure they'll be fine and you are welcome to hang on to the tenner. Just glad I caught the chance to get a set :)

Was just after a pic before you send them mate, sure they'll be fine though ;) ???? Pic ???? Did you get my PM buddy, i haven't finished your dials as i need to know what centre piece you wanted. Jason :D Yeah, I replied. Thought you'd already started them and realised they had the L in the middle, so I said to send a pic so I could see what it looked like? Think I've got the wrong end of the stick here. I'll take which either mate, just what is easiest. :)