How many times.THE BLINKING IS THE CODE.The codes come up if the eng over heats, low oil in eng and g/box,and air flow,
Th car light will blink on and off without ever stopping to tell you the system is opperating correctly that is the only code I get. The car has enough oil and didn't overheat. The only hint I have is another poster I saw a little bit ago that says that The Throttle Possition Sensor controls gas shutoff and stuff like that so I figured maybe that might be it but with out the codes it is extremly hard to diagnose
OK,Take out the main 15amp fuse, [for10 sec]refit ,then count how many blinks.The blinks should be about 1 sec apart.any blinks longer than 1sec is the next code and so on,eg[4 blinks then2 sec later5 blinks]the code would be 4.5 ,so count every sec until it repeats.your throttle pos sensor work off your air flow sencor and will bring up a code.[when 15amp fuse is removed ,it clears the faults] also check your exhaust sencor because that also works with the throttle sencor.hope this helps.TERRY
Terry I thank you for all the help. The light blinks one second apart forever neverchanges i have counted it all the way up to 200 blinks and no change. 1 second apart. What main 15 amp fuse are you refering to???
Under the bonet,the panel of fuses,read the under side,the IGN FUSE 15AMP,To get the codes up ,connect a wire from your diagnostic plug B1To B3, ANDyour codes come up[if u unable to get them up ,check the hand book or w/shop manual]I'm back to work Thursday next week, iwill check it out ,and let u know TERRY
Please let me know what engine u have so that i can get all the codes.
I have the 3.0 DOHC Strait 6. Thanks again.
CHECK ENGINE eg[4AJE]U WILL FIND IT ON CAM BELT COVER OR ON ENGINE PLATE,
Hi ,this is the engine the book comes up with 7MGE, JUST CHECK IF IT SAME.Also look at the back of your diagnostic cover and check if u have TE1,T1,E1.TERRY.
It is and I do...Those are the same terminals I have been using.