Do Not Sell My Personal Information Jump to content


jay_russell

Established Member
 View Profile  See their activity

  • Posts

    581

  • Joined

  • Last visited

 Content Type 

Profiles

Forums

Events

Store

Gallery

Tutorials

Lexus Owners Club

Gold Membership Discounts

Lexus Owners Club Video

News & Articles

Everything posted by jay_russell

  1. jay_russell
    16" or higher for the is200 5/114,3 et 45 but you van get lower like 39 cb is 60,1 you can use steels wheels from a lot of toyota cars like auris and corolla verso, avensis and these fit without problems. your better going for 16" rims as the tyres are cheaper and smaller. tyre size is 205/55/16
  2. jay_russell
    and then there is the water problem getting into the footwell fuse boxes. have a look at the fuses and holders for signs of water damage
  3. jay_russell
    you need a vandetta( driving pass ) for the swiss part. you can buy it at the boarder or on line. you will need to have a yellow safty vest and triangle warning sign and think it's a long way so plenty of breaks.
  4. jay_russell
    sorry yes mate it's blured hows this one
  5. jay_russell
    silly but check the wheel nuts to make sure they are tight. had a guy in today that had the same problem and was loose bults on his car.
  6. jay_russell
    it was from ebay mate for the is200. cost me 115 pounds and postage
  7. jay_russell
    looks like these from the heated seat
  8. jay_russell
    I brought a set a year back from a ebay seller and yes the tax was paid on them before i got them. dhl tried to send me a bill for 5 pounds and i told them that taxes were paid by the shipper and they said ok and nothing more to pay. this might be because i'm in sweden and the taxes might be higher than the uk..... but i did not pay so it was ok
  9. jay_russell
    there are 3 fuse boxes in the car. one in each footwell and one in the engine bay. have you checked them all? most people miss one
  10. jay_russell
    yes thats the bulb holder . just need a small screwdriver to undo the bulb holder in the bottom of the switch. pull out the switch and have a look. get a bulb from toyota for under a pound
  11. jay_russell
    i fitted a oil cooler with no problems. amd fitting kit
  12. jay_russell
    i have one over
  13. jay_russell
    i got a fensport one. good price and good yet not to hard.
  14. jay_russell
    get your self some bead sealer and seal them or go to a tire shope and ask them to do it
  15. jay_russell
    update photo's of the red someone got from me....
  16. jay_russell
    well to get the money back on these i have dropped the price to 65 pounds plus postage to members. five pounds going to the club on each set sold. see group buy section for info
  17. jay_russell
    well to get the money back on these i have dropped the price to 65 pounds plus postage.
  18. jay_russell
    i'm about to fit auto closing windows mate and would love the info from you on this
  19. jay_russell
    sounds like the car is in limp mode and to find out whats wrong you need to read the codes if any. then it couls be a simple plug they missed after dropping in the new engine. best to test it and see whats going on
  20. jay_russell
    yes mate you need to drop out the gear shift plate to drop the box. also it helps if you have a center tool for the clutch but you dont need it but it helps. drop the rear shaft then remove the box but it's tight to get those bolts on the top of the motor and be carefull not to trap any wires in between the box and motor as it's easy to do.
  21. jay_russell
    i hope you have a lift as this is a hard job to do on the floor. i just did mine at work and it's not easy but can be done. you might want to drop the gearbox
  22. jay_russell
    think you should have waited for the new lexus ct to come out then had the family still wanting you in the house and not in the dog house
  23. jay_russell
    buy a ecu and key set with all lock barrels from a scrap yard. all keys and locks and ecu might be the best way to go for a full set of working keys and locks
  24. jay_russell
    ok mate
  25. jay_russell
    i will take them off your hands mate you do the brake mod as is and the side light you need to run the wire to each bulb holder in the fogs from the boot wires
×
×
  • Create New...