Hi Steve, I have tried everthing to unblock the drivers side washer jet and have now resolved to removing both jets and giving then a good clean or buy new. Do you know how you remove the jets without cuasing any damage, It look a fiddly job.
Hi , Yep its quite easy .
open bonnet and look for a black oval blanking trim- gently prise off with a flat blade s/driver (i did get mine off with a finger nail) being careful not to drop it into the e/bay.
Its difficult to see into the hole due to location but the jet is held in place by a upper and lower spring clip which is part of the jet assy. again using a stubby flat s/driver its a case of pushing this into the main body of the jet when you get it right it should lift a little on the bonnet, then its just a case of wiggling it out so to speak. Best to do this when you have the new jets to go straight in else you will have to clamp the hose to stop it falling back into the hole.
am takiing mine into work ttommorow to airline it out.
steve.
Cheers Steve I will give it a try tommorrow.