zedman

Got GS 450h last week WOW :D

Has anyone connected a lazer detector (valentine one) using the reversing mirror electrical feed? Help much appreciated Have just bought the RJ11 connection adaptor wire! Chaz Pick up car next week----------2010 SE-L :shruriken:

Made some changes to my advert on buy and sell forum ,won't go any lower. :megaangry:Also on autotrader The Glasses guide trade selling price for this motor is £5,580. Must be worth a look,gotta be up there with the best!!! ( Don't really want to trade it in.......Glasses guide price trade in,in excellent condition......£3,450!!!! ,meaning they make almost two grand profit. :arrrggg-matey: This car IS in excellent condition. chaZ

That time again ,bought the 300,spent money,nothing else to do,now selling on classified ads Also on Autotrader http://www.autotrader.co.uk/classified/advert/201205445581586/sort/priceasc/usedcars/engine-size-cars/3l_to_3-9l/model/is/make/lexus/radius/1500/page/3/postcode/po142bd?logcode=p Price could be negotiable!!! :) The good news is, I will buy the GS450h ANy????

l Iike this reply!!!

hi,press the same button inwards or one near it(if i am not wrong)and this should eject the disc,however make sure the bit that slides across is open and not closed enabling the disc to eject(hope this makes sense?) As above did mine couple of weeks ago...open slide..push and hold until ejection!!

General,the black plastic slide is also the eject button!!!!

I have one ......2003/2004 ver1 You're welcome to it, If you do, pm me you're address :luck: If it's not wanted by GNZ, I'll have it! :) Ok i'LL wait for a reply from GNZ first,if he dose'nt want it ...It's yours!! :D

I have one ......2003/2004 ver1 You're welcome to it, If you do, pm me your address :luck:

Have to agree here ...have had these on and off over the years ,never had any trouble :) On a par with the Kumhos bit more expensive though

Delighted you like the knob,went to a good home!!!!!!

Iv'e had Kumho's on both is200/300 as good as any of the well known makes and they are cheap ...see----http://www.dooyoo.co.uk/car-tyres/kumho-tyres/1094075/

Possibly dry joint somewhere in PCB

First oil change on is300--- Ball Ache---but no probs---all done from underneath after removing nearside front wheel--probably could have done from the top with smaller stronger hands!!!!! ^_^

Just "lucky",I suppose!!!! Shouls have been this:----

Result :luck:

I had the very same problem found it dangling when being tracked...gotta be a design fault!!! otherwise never knew anything, had the bracket mended the same way (WELDED) ,plugged back in but unlike you ,no warning light..so ok there.. Try unplugging and replugging check wiring to plug might have broken when dangling if no joy there, you will get 15% to 20% off as a gold member!!!(just joined myself!!!) chaZT hanks for that, wierd that no light shows when it is hanging off ! will try re connecting ,certain no damage has happened to wires. If no damage to wires or sensor, the bracket may not be in the EXACT same orientation which defines "level", and can take the automatic control out of range. The headlamps should move up then down to the correct postion when switching on in auto. If they do this but if the "correct" position they settle into is too high or low, it suggest this is the problem. Tilting the sensor should make the headlamps move up and down. The bracket only fits one way with no play in the 6mm holes,however you are probably right in your explanation about the orientation and automatic control..I can understand that if the switch spindle is not in the correct position when replacing the bracket ,there could be a levelling bias. When I disconnected the plug the warning lamp came on in the dash,however every time I replaced the plug the warning lamp went out...So maybe a damaged SWITCH, Tony??????

I had the very same problem found it dangling when being tracked...gotta be a design fault!!! otherwise never knew anything, had the bracket mended the same way (WELDED) ,plugged back in but unlike you ,no warning light..so ok there.. Try unplugging and replugging check wiring to plug might have broken when dangling if no joy there, you will get 15% to 20% off as a gold member!!!(just joined myself!!!) chaZ

Wanted the above for modification please £££££££££££££££££????????????? :luck: chaZ

Thanks for the pointer job done :D :D

Does anyone know if there is a post on here describing the method to access and remove the radio chaZ

Lovely drive much impressed..but then I knew it would be.Don't really miss the power much yet, although at some stage I probably will!!! :)

BOUGHT IS 200 SPORT TO DAY ;)

Thank you all ,what lovely people you are :heart: Looks like I have sold the Z so am looking NOW for car chaZ