Do Not Sell My Personal Information Jump to content


J Henderson

Established Member
  • Posts

    1,985
  • Joined

  • Last visited

  • Days Won

    6

 Content Type 

Profiles

Forums

Events

Store

Gallery

Tutorials

Lexus Owners Club

Gold Membership Discounts

Lexus Owners Club Video

News & Articles

Everything posted by J Henderson

  1. Does a screen replacement also not require something else - such as the plastic trims either side of the glass, or some clips or whatever to be replaced too? I'm sure I've read on here about people having issues when a windscreen was replaced and the old stuff was re-used? In any event, John. Check your insurance policy details. You might be able to insist on a Lexus windscreen being fitted. I know my policy has a separate excess payment for a "non approved" glass replacement.
  2. Full disclosure - not my mirror! The picture is off the Internet. Who knows though, mine might actually look similar as I also suffer from this issue. Haven't had my mirrors apart since 2017 though to confirm. I find the streaks clean up quite well by going over them with a clay mitt. Having a silver car, I can get away with doing just this without having to polish out any marring caused by the claying process.
  3. This is caused by corrosion on the aluminium parts inside the mirror. Any water inside the mirror casing interacts with it and causes those milky deposits to develop. Unless there's a product that could somehow "seal" the metal to prevent it from happening (maybe painting them with something?), I'm not aware of any possible fix outside of replacing the parts in question.
  4. In the fusebox under the dashboard on the driver's side, there's a 15A one labelled CIG.
  5. Make sure you put the AC into recirculation mode before trying to replace the old cabin filter.
  6. Welcome. Certainly looks like Windsor Blue. The paint code 8U0 on your VIN plate in the passenger door shut will confirm.
  7. Very subtle changes, mainly to the upper and lower grille having a slightly more aggressive "V" shape. Shouldn't matter if you replace the complete bumper/grille package that McSchmoopy is offering.
  8. Yeah, the two opposing surfaces (aluminium & steel) bond together pretty good over time. I got a garage to replace mine. First one went in 2021, then the other side lasted until 2023.
  9. HKS Super Sound Master looks pretty distinctive.
  10. Limiting the top speed to protect the MGU seems plausible, but Lexus doesn't appear to do this with "bigger" cars like the GS450h or LC500h. They'll do 155mph if required. On a related subject, I caught the tail end of an old Top Gear episode the other day, where Clarkson was driving the then-new Nissan GT-R, in Japan. That car was also limited to 180km/h like everything else, but interestingly, the limit was removed when the car knew (via it's navigation system) that it was on the Fuji Speedway racetrack.
  11. I fitted tyres for a while when I was a lad and plug repairs are perfectly fine. I would actually prefer this repair method over a normal patch since the stem of the plug also fills out the entry wound. Meaning there's less chance of the steel belts inside the carcass getting corroded from water ingress.
  12. Same price as last year, no? I renewed mine in August last year for £365, and according to what I've read, the price on April 1st, will also be £365. I agree though. The money should be spent on the roads.
  13. Mental how JLR themselves didn't even want to insure one of their own cars. 🤣
  14. The fuel pump, or parts of it are more likely to corrode or fail due to the higher ethanol content. Have a read through This Thread for the specifics.
  15. Just renewed mine a few days ago. Price had gone up by 14% to £279, which didn't seem too bad compared to some of the shocking quotes I've seen mentioned on this forum recently.
  16. Good advice, but before ordering anything, you'll have to make sure you have an independent garage that is willing to fit customer-supplied parts. Many will refuse to do so.
  17. Welcome 🙂 Do you have 2 keys or just the one? I'm sure you're worrying over nothing, but you could maybe put the key in the centre console and just watch the person whilst they work. Should only take about an hour at most. £410 to update the maps? Sheesh, I would put that on hold indefinitely. When I first got my car I was told it would be circa £200 and I was loathe to pay that much. Better off using free apps like Google maps or Waze.
  18. Sure, the fronts are definitely an upgrade. 4 piston monobloc AVICS calipers & 334mm discs vs single piston caliper/carrier setup (slide pins) & 296mm disc. But the rear brakes are the same on IS250/IS350/GS300 - 310mm vented. You mentioned sourcing GS calipers for the rear, hence why I said you already have those. "GS brakes" on the rear would only be an upgrade on an early car with solid discs. Edit: beaten by Colin 🙂
  19. The rear brakes on a GS are exactly the same as what you already have on a 2010 IS250, so that wouldn't be an upgrade. As for needing new discs and pads. You might get away with cleaning the disc up, but new pads will probably be needed. Usually, when a caliper has been sticking, one of the pads gets heavily worn down compared to the other.
  20. What kit did you use? I'm guessing that its maybe too cold for the product to have cured properly.
  21. Yeah, that sounds like the front tyres skipping/scrubbing when they're cold. Nothing to worry about. Certain tyre brands are worse than others. Typically the more performance-orientated ones with large square tread blocks on the outside, seem to be more prone to this issue.
  22. I'm sorry for your loss. I would guess somewhere around the 5.5-6.5K range, if it's an automatic with decent service history.
  23. It will probably be underneath the dashboard, near the pedals. That's where it is on an IS250. You might have to remove some lower trim panel to access it.
  24. I did this on my previous 2nd-Gen IS250 F-Sport, which had the same front wheel & tyre specs as a 3rd-Gen. Zero issues with rubbing whatsoever. The arch gap was really massive on that car for whatever reason, and I wanted to change the front tyres anyway as they were a different brand to the rears, so went with 235s to try and eliminate some of the unsightly gap. Pros & Cons; + Was visually more appealing. + The wider tyres didn't skip or crab when steering sharply in the cold. - 235s were about 10% more expensive. PS. This car was written-off with those "wrong" 235/40R18 tyres on it. Insurance never said a word and paid out in full.
×
×
  • Create New...