shortfuse

iam selling my x plate is200 .good condition with 130000 on the clock for further info email me omphilip.ware1@hotmail.com

i,ve just fitted the mirror mod and it works a treat

just a few words to thank MATT C for his help just purchased exactly what i needed

where can i buy a lexus is200 PO-40 control unit from?

i,ve never logged onto FACEBOOK don,t like the site to many nosy people all i want is the correct name for the mod kit

what do i look for on ebay to be able to complete this mod?

i would like to add my thanks and appreciation to you and all the members of the armed forces who have served not only i afgan.. but every where there as been conflict THANK YOU

will my lexus is200 take 20"wheels with 255/35/20 tyres???

when i took my matrix to the rad specialist it took 2 hours of high pressure flushing with chemicals to clear it of all the crud

i agree with the previous posting only replacement is the answer

just remove the clutch pedal and you have all the room you need

yes i know that i tried everything over a 6 month period .eventually i replaced the matrix this solved the problem it really is quite easy to do, takes about 2 hours

do you mean regas the ac? if so how does that effect heat coming off the heater matrix?

its your heater matrix its blocked

as for as the boot release you need to keep the button pressed for a few seconds for it to release

these covers do appear on ebay from time to time i had to wait about 6 months but did eventuley get one

get an auto spark to do a drop test on it then at least you will know if it is the battery

its not the fact that its leaking, just totally gunged up the radiator specialist i used took two hours of constant flushing along with air pressure to un block it

are both the heater feed pipes in the engine compartment hot?. if so your heater matrix needs changing. i had the same problem tried everything to no avail. but when i changed my matrix this solved my problem i now have a very warm car interior

sorry but i prefer the original colour it breaks all that black up on the boot lid

no need for all that rig marole just remove the clutch pedal and the matrix is easy to remove

its pretty straight forward. 1.disconnect the two heater feed pipes in the engine compartment 2.remove the tray underneath the steering wheel unclip the relevant switches from the tray along with the bonnet release mechanism 3.remove the clutch pedal its held on by two nuts and one bolt unclip the cotter pin that connects to the master cylinder the whole unit will then come out 4 unscrew the three self tapping screws holding the metal feed pipes (remember to put some towels in the footwell to soak up any water that comes from the matrix 5 the matrix can then be pulled straight out from the heater box 6 take the matrix to your local rad repair shop to install the reconned unit just reverse the procedure thats it job done

yes that was me

i,ve managed to change the heater matrix on my is200 with the heater unit in place if you remove the clutch pedal you have all the room you need whole job took roughly 2 hours