andy haw

Thinking about selling the Lexus,where would be the best place to sell.

Hi Andy, I know you have probably checked this but whats the fluid level like? Undo the cap and check that the switch is working properly (by sliding the float up and down while someone watches the instrument cluster). As maneesh believed the fuse layouts are printed under the cover of the fusebox on the LS400, the EFI fuse is the one you have to pull for >10 seconds to clear the codes. Also this special service tool (SST tool p/n # 09843-18020) is only a small length of wire with two pin terminals crimped onto the ends. You can plug it into either the TDCL or the engine diagnostics port in the engine bay. Then just count the numbers flashing up on the engine "check" light. Hope you are well, been away from the boards due to work commitments. Intend to return the rack next time I am out your way. Cheers, Leadfoot. Thanks for that I will check as i had the fluid changed. No problem with the rack if you got the space keep hold of it. How is the old girl doing.

You will get a lot of car for 3k, but not a minter. There will be the usual things like worn suspension (megabucks to replace control arms front and rear), blacked out LCD ac panel. Despite the engine and gearbox being bulletproof, they still require regular maintainance. Make sure the cambelt has been done. Buy the best you can afford mate. Air suspension is only on imports (Celsiors) and is EXTREMELY expensive to fix on older cars. AVOID like the plague mate.. You just missed out on a real nice low mileage series 3, it was sold by Chris Skelton on here, and he'd spent a good few grand doing a complete suspension overhaul. The cars for 3k still drive ok, but most folk having never driven a brand new LS don't even realise how sloppy the suspension has become on a 10 year old car that hasn't had the overhaul. Go drive one that's had the overhaul, and one that hasn't, and you will see what I mean dude... :winky: Just be realistic about what to expect with these cars that once cost 50 big ones.. Oh, and to answer your question. I'd say 3k would probably get you into a MINT series 2 (93-94) model. However, you could also pick up a very high mileage series 3 model (95-98) too. Probably an early 1995 model. Yes you are right Maneesh, think I would go for the mk2.

Faulty switch thats my ten pounds worth.

Look on ebay uk.

Thats about the price. You can join the two wires together to make the light on the dash go out.

If the mileage checks out and the price is right I dont think you will go wrong. Get the car inspected to make sure all is in order, a small price to pay to be on the safe side. The newer models are an improvement over the earlier models but you will still get a lot of car for the money and if it was my choice and the mileage is genuine I would rather go with the car you are looking at which you say is in good nick than a newer model with a lot more miles and not in such good nick let alone the possible price difference for a newer model.

Hello and welcome to the world of Lexus ownership and this forum, I hope you allowed for this in the price you paid as it's a common problem along with the clock/ac lcd If you look on ebay you will find a company offering repairs for £249.99.( but you still have to remove the dash and send it away!) Lexus dealer is the simplest but most expensive option But I think Chris Vince is the forum guru on these matters. Cheers, Steve Three replies in 5 minutes are we all off work today? As far as I am aware Chris only does the climate control/clock display. You could try these. Item number: 4630468888 on ebay.

Think you will find its a problem within instrument cluster. Try posting on USA site for more info as its a common problem.

wont do any harm to spray all the connectors under rear seat as I explained in a previous post. Thanks Andy, I wasn't sure as it related to the 90-92 model but will do this tomorrow by the way I had a quick look tonight and from what I've read about removal of rear seat there should be two tags at the front of the base which you pull to release the locking device ( another site suggested a crowbar!!!! what on a Lexus!) could you confirm please and is the connector under the seat base or back part?. Cheers, Steve No crowbar needed,pull the base of the seat upwards and it should release. The connectors are under the base disconnect them and spray/clean with wd40. Ther is a link under recent post started by tom hadfield which has a link about the problem although the picture is not an ls the principle is the same. I had this problem on a 92 I owned but think it is related to mk1 and mk2.

wont do any harm to spray all the connectors under rear seat as I explained in a previous post.

Whats the difference between yours and a UK LS 400 mk2.

Anyone got any pics showing the fuses. Anyone got any pics showing the fuses. Just had a look shows efi fuse and a large fuse type/regulator showing engine management.?

Thanks Maneesh I will give it a try.

Have recently replaced brake pad sensor on my car but the dash light is still on. Before I go checking for a loose connection I want to re set the ECU anyone know how to do this or should I just disconnect the battery or could I cause problems doing this.

Glad to see you fixed the problem,although I did say to spray all the connectors to be safe. Mine and others I have seen have all been yellow/orange, is yours an import. Are you still selling it know its fixed.

Mine was as well.

Try this. http://carstereohelp.com/repairDoItYoursel...usRepairVol.htm

Looks all ok to me Simon. Would you change water pump,plugs leads etc while you are at it ?.

Did not think the 1992 were folding is it an import. You could try swift breakers at worthing.

Had the Lex in for the MOT yesterday and am pleased to say it passed. Had a advisory note to say the nearside rear lower suspension arm has slight play in pin/bush. The tester said its not very bad but could knock the tyre out so I want to fix it in the near future. My question is this,does the arm come complete with the bush.

Just fitted clear side repeaters to my car. What a difference they make. Purchased them from the land of oz,perfect fit and exactly the same as the ones they replaced except the colour. Looked at the ones on fleabay which are ok but these are the best match. If anyone wants details etc let me know

Had a similiar problem if its the same as mine it is due to the phone mute on the wiring loom. If I remember right you need to take out the back seat where behind the passenger seat you will see a yellow/ orange connecter spray with WD40 and any others to be safe. The problem is moisture causing the phone mute to cut in hence you cannot hear stereo. Give it a try and let us know how you got on as it is a common problem on gen 1 models. You dont need a hands free kit fitted for this problem to occur.

Have got some from oz on order I understand they are a perfect fit and are for a landcruiser will keep you posted. These are for a mk 2. Simon, have you tried them.

Did they give you a price. Their sister company is europarts.com where you can get a price online.