Bullmastiff

Hi thanks Colin were did you buy the parts from ? is that part number recognised by Lexus or do I need to purchase from somewhere else

Thanks i just see it nice one is that a code I could mention to Lexus and they get the part

I understand what your saying seems simple but I only get once chance get it wrong then I need an original trim. Do you know where I could get one from or find a part number? regards

Hi again and happy new year. i have another question do I need a new trim to replace the blanking trim ? As I can see a big gap around the cc stalk if so is there a part number

So I don’t need to take off the air bag from steering wheel ? It’s all done from the blanking plate? And can I get to the m5 screw holes from just removing the blanking plate ? i really do appreciate your help thanks

So I don’t need to take off the air bag from steering wheel ? It’s all done from the blanking plate? And can I get to the m5 screw holes from just removing the blanking plate ? i really do appreciate your help thanks

So if I just plug the original cc it should recognise it and all should work? I understand I need to disconnect the 12v battery before carrying out the work? this is what I have form a previous CT200h please see attached photo

Hi thanks for advice re battery. the one I have is the original cc so will that still work? Also if I disconnect battery and once finished and reconnect do I need to do anything else

So are you saying the original cc unit I have will work once fitted as you say plug and play without any other work to be done

Hi thanks for advice re battery. the one I have is the original cc so will that still work? Also if I disconnect battery and once finished and reconnect do I need to do anything else

Hi thanks for advice re battery. the one I have is the original cc so will that still work? Also if I disconnect battery and once finished and reconnect do I need to do anything else

Yes I have and there is something to plug it in

Definitely not snapped off everything still intact. Do you know if I can fit the cruise control I did put a photo of it in previous message

Definitely not snapped off everything still intact. Do you know if I can fit the cruise control I did put a photo of it in previous message

Hi all I’m new to this forum I need some help regarding my Lexus CT200h year 2011 the car is fully loaded apart from not having cruise control which is disappointing. I wanted to add the cruise control stalk I did some researching and was told by many peeps I can do this if I buy an original stalk I now have this but want to fit it I have found images and instructions how to do this, does anyone here know if it will work once it’s been installed ? Thanks in advance