Do Not Sell My Personal Information Jump to content


Harry Hindmarch

Members
  • Posts

    2
  • Joined

  • Last visited

Profile Information

  • First Name
    Harry
  • Lexus Model
    Sc430
  • Year of Lexus
    2003
  • UK/Ireland Location
    Dorset

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Harry Hindmarch's Achievements

Newbie

Newbie (1/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. Hi Richard. Just come across this post and wanted to ask if your still making clear lenses? Any chance you would be interested in making clear side reflectors for the sc430? I've got a pair of standard refectors spare if you need some to copy from. Thanks in advance Harry
  2. Right I've had this problem for a few months now and I've tried a number of things and not had any luck. Hoping someone in here might be able to shine a light on the issue. So my sc430 is an 03 with 160k on the clock. Its had lpg fitted by the previous owner a few years ago. When I start the car it starts on petrol and automatically changes over to lpg once the cars warmed up a little bit. The problem is when I start the car it runs lumpy like a misfire. When the car is put into drive it struggles to run but as you accelerate the car powers through the misfire. But if I come to a stand still again it will start to misfire again. Sometimes the misfire is bad enough that the engine light comes on and flashes also bringing on the traction control light switching the fraction control off. Once the car switches over to lpg after a couple minutes of running it runs smoothly without a misfire. I have replaced all the spark plugs and all the ignition coils with high quality replacements. I've check for vacum leaks and anything that looks suspicious but without luck. Also replaced the temperature sensor but no change. Also since buying the car it's always had the engine light on showing a p0430 code for the lambda sensor on the right side of the car. I've replaced the pre cat sensor but the code comes straight back after the car goes from cold to warm again after the codes cleared. I know this could be a dying cat but I can't see how that would cause a misfire? I'm unsure what to try next and don't want to throw money on parts that don't make a difference. If anyone can shine some light on the problem I'd very much appreciate it as I'm lost on what to do next. Thanks everyone
  3. Welcome to Europe's Leading Lexus Club! Please Enjoy!

×
×
  • Create New...