yasar31

I got tezza turbo good buzz when it runs good. Lot of ppl think it sounds better than impreza.

Hi mate I got my car done but just the turbo piping including the intercooler. Had to measure each pipe seperately. Got the samco hoses from MSW and demon tweeks.

sorted guys thanks for the help managed to get the part no. of the old one. seen one on ebay for 45 quid just got that 1. Thanks If they're anything like the cars I work on they're vehicle specific... Think Yasar's looking for aftermarket 1 tho

Tried the dealer. They only do standard parts and won't deal with aftermarket parts. Have you tried your local Toyota dealer? take the part no. into them ... :)

Any1 know where to get a denso air flow meter from?

I got leather put in my car 2 tone effect black from the sides and like al ight silvery grey in the centre. Looks wicked alot of people that seen it like it cause it's just nice and suttle. Nothin overboard. Cars away gettin some stuff done 2 it will try and pop in2 the garage 2 get some pics for u in the next couple of days. i know a fella with evo 8 seats in his tezza look class but there not that comfy

What kind of forum is this? I'm sure some1 has done a big brake conversion on their tezza. Why am i getting ignored for? I thought this forum was meant 2 be a friendly forum and ppl were meant 2 help u out. So where are all the ppl with the knowledge about these cars? As far as i know the IS300 has the same brakes too, so yes they will fit, but it's not an upgrade as such

Anyone know the rotor diameters of the RS200 rotor and the IS300 rotor. Also does anyone have any knowledge of the offset of these rotors on these 2 cars, are the callipers and the brake lines on both these cars the same or do they differ and could some1 confirm the front spindle of these cars. I am trying to order a big brake kit direct from stoptech and they are asking me these questions. If i don't have answer to these questions then i will have to take a gamble on the IS300 big brake kit. Which i want 2 try and avoid Please can some1 help me with these questions. Thanks As far as i know the IS300 has the same brakes too, so yes they will fit, but it's not an upgrade as such

Yeah i'm in touch with stoptech in America wanted to know if the big brake kit for an IS300 will fit the Tezza. I'm sure i read somewhere on the forum that Matt had a pair of Stoptech big brake kit on his car. Am i right. Matt if u r reading this thread can u please pm me just need some sizes for the disks and calipers of u. Thanks As far as i know the IS300 has the same brakes too, so yes they will fit, but it's not an upgrade as such

will brakes from an IS300 fit?

ok what if i use 18" wheels. I'm sure some1 must have some info about brake upgrades on this forum.

Will any other cars big brake kit fit an RS200? Big brake kits for the RS200 are very rare. I would prefer to pick up a set of second hand brake callipers like stoptech or brembo have seen a few second hand ones for sale but they are for different makes of cars was wondering if they could fit the RS200.. any1 have any experience in this field? Prolex do some drill and grooved disks, these willfir your standard rs caliper, any bigger than standard discs and you will need a big brake kit conversion, about 2 grand

Hi i'm looking 2 change my rear brakes on the RS200. Preffered are Stoptech or Brembo any1 know what's the biggest size of disc i can put on 17" wheels with standard callipers? Will any other car's disks and callipers fit an RS200? Cheers

I emailed the guy he says it cost him 150 notes for the guy fitting that screen into that housing and he paid 190 notes for the screen. so cost him 340 quid. I think he got a bit ripped off.

Any 1 interested http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...em=330051403801

Looks very like mine. Nice colour!

Hi can some1 tell me if i replace the the exhaust pulley with a new 1. That this will sort the variable valve timing on my car. As the exhaust pulley is wobbling when u rev the car. Or does any1 know how 2 sort the variable valve timing on these cars. I heard from Chris at Hyper sports that this is quite a common fault with the Altezza RS200. Cheers ppl

ANY1???

I have a set of these rear light covers. They have never been fitted i.e they will need 2 be painted. pm me if u r interested. cheeers

Any1 know if i can check the operation of the vvti on this. If so how do i go about checking it?

Ok guys the inlet pulley has been changed with a new 1 has made some difference. But i still think it's not running the way it was running b4. They have now checked everythin infront of me. Stuck an A/F meter on it but fuelling is perfectly fine. Stuck a computer on it and their were no faults found. Checked all the sensors and pipes nothin found their either. Checked the cam timing about 5 times and they r 110% positive it's right. So *** knows whats wrong with the car. Wanted 2 get in2 the ecu but can't because iy's a piggy back ecu and is sealed so no1 can tamper with the settings on it. Any1 have any more ideas on this problem that i have?

nice 1 aido. many thanks will pm see what he says.

I don't think their is any1 in scotland that knows these cars. TDI in cheshire r the closest and even then ur talking a few hundred miles away and it's abit hard 2 get away when u have ur own buisness.

Sorry mark i meant that cause i stay on the other end of the country and can't bring the car down 2 u. If i was close by then i know u would have been able 2 do somethin about it. Thanks Hi Yasar, I didn't say we couldn't help you, am I sorry if my email seemed ambiguous to you. I have copied and pasted my email reply to you below: Hi Yasar, Thanks for your enquiry. We are familiar with the Greddy Emanage and will be happy to take a look for you. We charge £85 plus vat per hour for tuning work. Please let me know if I can be of any more help. Kind regards Mark Catchpole Torque Developments International PLC Unit 5 Cliffside Trade Park Motherwell Way Thurrock Essex RM20 3XD The number for Thor Racing is 01676 535888 I hope this helps Mark :)

Am thanks for ur help very much appreciated. Is their any chance i can call u and talk 2 u as i know u have alot of knowledge about the tezza. I have booked the car in with krtuning.co.uk. to check the timing on the pulleys is this a good bet? The thing is that i can't find any1 local that has dyno and and diagnose the fault i think closset 1 2 me is daztec and they r still a couple of hundred miles away from me.