Terry Russell

Well after my post in January??? My rx300 seems to be behaving after the introduction of the rad weld stuff. it has taken until now for the heater matrix to stop depositing the coolant fluid on the drivers side carpet, I drove the car a couple of times in the last couple of weeks and the coolant level has not dropped, is this fixed ???. well it is at the moment, 🤞 Terry

Thank you all for your comments, I have done a little research and the next course of action is K-seal, apparently it is brilliant, my local garage said it will be around a £1000 to fix the matrix, so K-seal is a much cheaper option. I will let you know in a day or two how it is. T

I had the car serviced 2 weeks ago, just checked the coolant level and it was a long way down, so more money.

Thanks guys, I have taken out the windscreen wiper motor, stuck loads of implements in to the wing holes , blasted it with an airline and the water poured out very dirty. I have poured lots of water over the car, no water in at the moment, I will have a look at the heater next, it is only in the drivers well, everywhere else is bone dry grrrrrrrr.

Morning all it’s me again, my2005 RX has enough water in the drivers footwell, I was expecting to find a ships remains. I have cleared the sun roof tubes but it seems to be the wettest nearer the foot brake, any ideas how the bloody stuff is getting in ??. T

No it not your old one BUT it might be, the previous owner had a personal plater on it,

Good day to all, I have just purchased a 2005 rx300, as far as I am aware all the interior lights work BUT, can anyone tell me if the mirror adjuster and mirror in buttons are supposed to be illuminated. T