marcomck

would that cause the alloys to be hot to touch? Jack up car and check for brakes binding if very hot . There is normally some heat transfer to the wheels but not much. If no punctures have wheels checked for corrosion, preventing tyre from sealing. Thanks i will try that

would that cause the alloys to be hot to touch?

Every month or so i go out and find one of my front tyres flat, I have 18inch alloys and last month the passenger side alloy was roasting hot one day, turned out to be stuck caliper, £189 pounds later it was fixed. last night leaving work i looked to find drivers side wheel deflated, quick pump up and was fine until this morning I have notice both alloys are warm to the touch, when they shouldnt be. what is going on with my is200? i really couldnt be doing with new caliper again.

Hi guys I have just taken ownership of an is200 SE 2001. Everything was fine until tonight as i went to turn on the car. When I insert the key in the ignition (the main lights came on) When I turn the key to start (the main lights go off) The full beams only work when in 'flash' mode (when pulling the lever back) It wont work when puched forward - the roper position. So now i can only drive at night with the lower bumper lights on, and holding the light lever on FULL BEAM. I have no main light. I have looked at the fuse box and it seems that they had a dvd music system or alarm hooked up with an extra wire coming out. Any thoughts on what to do? How much for an auto spark to rectify? PS theres no engine light warning or anything like that

Thx mate

I have a 99 is200 sport, in average condition. Does anyone have the book price, its got 100k on the clock. cheers

Thats fair enough but I want to know if i can get cash back from the work that was done last year.

Hi guys, last year I got the front brake pads and discs replace by kwik-fit. They gave me that guarantee thing where it said all parts and labour is guaranteed a lifetime. Dont know how you can guarantee brake pads a lifetime??? anyhow, my rear ones have now gone - and i brought it to a local garage who; looking at all wheels said i needed them all replaced (shoes & discs), i explained the fronts were done last year, and they showed me the front discs and shoes, which were pretty well worn and some grinding had started on the disc also. So I'm thinking of taking this up with knik-fit........ surely they should have lasted longer than a year no matter how you drive (i'm not particularly agressive). What do you think? am i wasting my time? thanks

Hi steve, no it sounds fine, got the timing belt changed last year. Does P1349 no cover a whole plethora of problems? What should i do?

Got a problem - the obd2 scanner throws up: P1349 01/02 P1349 02/02 Anyone know what its teeling me? thanks

thanks guys will do, and get back

As i was travelling to work today, wasnt particularly pushing it - when the dashboard lights up the engine light and the trc light started flashing. eek! whats this? i had the timing belt changed last year, and its just passed the mot last week. anyone have any idea? cheers IS200 Sport 1999 - 82k

thanks mate, i think i'll give it a go. PS Where is it located? The oil level and plug that is?

not really a crunch, just very difficlut to get into gear, bit of blockage. I can get it in by jigging it a little, but it used to be so smooth.

Hi, has anyone experienced difficulty changing from 5th to 6th, its ok going from 4th to 6th but is this a common is200 problem? How difficult is it to fix gearbox? any pointers?

Hi folks, 99 is200 sport, 75k, new timing belt last month. I have just noticed a strange 'wubbing' noise (thats how I can only describe it). But its from the front wheels and as i get faster the noise becomes more rapid. The higher up the gears I go the louder it gets. Does this sound like wheel bearings? Is it an urgent job to get sorted? cheers

Hooray!! Job done, eventually. Thanks Mossyn, what I did was flush the engine, I changed the oil and oil filter, reset ecu and hey presto! the warning lights are off! I have done about 600 miles since.

Michael where did you get this done? I'm in Belfast.

Crikey mate thats some forum recall you did, and just in time too! I am at a complete loss with it. I would like to try your solution. Did you do it yourself? is it a tough job?

So we get warning light to tell us to change the cam belt and tensioner Thats a new one on me, other than the belt stretching that far as to affect the timing, making the light come on ? Got timimg belt replaced and new tensioner at local garage. driving home.........................F**KING WARNING LIGHTS BACK ON!!!!!!!! :tsktsk: If lexus cant diagnose it properly anyone in Northern Ireland know anyone who can????

Our survey says........... New timing belt and tensioner.

Yea mate they reset it and lo and behold its returned. Do you think its a major inspection job?

*****! Sounds expensive, but I havent changed the timing belt, what should I look out for? or should I leave in to a garage? The garage that did the diagnostic check- didn't they tell you what the problem might be? Someone else might know how to fix the problem, sit tight.... They said its a specific toyota/lexus prob, their machine couldnt give any more details other than the code. I'm trying to stay away from the dealer as It costs a fortune just to look at it. Theres only 71,000 miles on the car, surely a belt change should be at 100,000. If theres no other way then I'll just have to suck it and see.

*****! Sounds expensive, but I havent changed the timing belt, what should I look out for? or should I leave in to a garage?

Ok gentlemen, got a local garage to run diag and the code: P1349 came back. Any1 know what this could be? thx