Description
IS200 Airbag Removal & Part 1 of Steering Wheel Removal
Workshop disclaimer applies!
DISCONNECT THE BATTERY NEG - TERMINAL
STEERING WHEEL PAD
NOTICE:
If the airbag connector is disconnected with the ignition switch at ON or ACC faults will be recorded on the ECU
(1) Place the front wheels facing straight ahead.
(2) Using a TORX© socket wrench, loosen the 2 TORX© screws untill the groove along the screw circumfrence catches on the screw case.
(3) Pull out the wheel pad from the steering wheel and disconnect the airbag sensor
CAUTION: When storing the wheel pad, keep the upper surface of the pad facing upward.
never dis-assemble the wheel pad
NOTICE:
When removing the wheel pad, take care not to pull the airbag wire harnes.
Thanks to Mat Clawley for this guide!
Recommended Comments
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.