Sign in to follow this  

SC430 Brake Bleeding


Description

How to bleed your SC430 brakes.

NOTE: Do not let brake fluid remain on painted surfaces. Wash it off immediately

This is a 2 person operation

(1) Fill reservoir with brake fluid to specification:

SAE J1703 or FMVSS No. 116 DOT3

(2) Connect the Bleed tube to the caliper(nipple)

(3) Depress the brake pedal several times, then loosen the bleed nipple with the pedal held down.

(4) At the point that fluid stops coming out, tighten the bleed nipple, then release the brake pedal

(5) Repeat 3 + 4 untill all the air in the fluid has been bled out

REPEAT THE PROCEDURE FOR ALL BRAKE LINES AT EACH WHEEL

Torque: 11N .m (110 Kgf.cm, 8 Ft.lbf)



Recommended Comments

There are no comments to display.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Add a Comment

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.