Do Not Sell My Personal Information Jump to content


Replacing LS400 Rear Brake Pads


Description

Replacing LS Rear Brake Pads

1.remove back wheel

2. Inspect Pad Thickness

Minimum Thickness : 1.0mm (0.039 in)

3.Remove Anti-Squeal Spring And Pad Guide

NOTICE

. Do Not deform the clip and anti-sqeal spring

.The anti-squeal clip and spring can be used again, provided that they have sufficient rebound, no-deformation, cracks or wear, and have had all rust, dirt and particles cleaned off.

4.Remove Pads And Anti-Squeal Shims

5.Check Disc Thickness And Runout

6.Install New Pads

HINT

.Make sure the arrows on the inner anti-squeal shims facing to the direction of disc rotation

.Preess in the pistons with a wrench handle or equivelant(tape the end of the tool with tape)

.If the piston is difficult to push in, loosen the bleeder screw

7.Install Pad GuidePin And Anti-Squeal Spring

8.Install Rear Wheel TORQUE TO: 103Nm (1,050Kgf.cm, 76 ft.lbf)

9.Depress Brake Pedal Several Times

10.Check That Fluid Level Is At Max Line

Thanks to Mat Clawley for the guide!


Extra Fields

General

  • Time Taken?
    30 mins
  • Difficulty Level? 1-5
    3
  • Like 1

User Feedback

Recommended Comments

There are no comments to display.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Add a Comment

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...