satnam

Hello All,

Iv had the same problem with my 99 GS300 for about a month, recently car started playing up, only reving to 2000 rpm, also seemed like the car was going to stall on me a few times, all while the ETC/PWR light is flashing. So i got my local mechanic to check it out.

The diagnostic report came back with the following error codes:

1). P0155 O2 Sensor Heater Circuit Malfunction (Bank 2 Sensor 1)

2). P0763 Shift Solenoid C Electrical

My mechanic will get back to my to let me know how much its gonna cost, will post as soon as I find out. The diagnostic cost me £40.

If anyone knows how much this should cost, it would be great to get a heads up.

Thanks for your help and advice.

Cheers Y'all.

Got it fixed, looks like it was a burnt out fuse, plus the fusebox needed some re-soldering, i had also fitted the new LED rear lamp cluster. looks sweet, all in with new buls 9orange) cost me £208 plus labour. pheww. i thought i was in trouble there.

Car gets picked up on tuesday, i'll let you know.

Lexus Twikenham wanted £115 just to look at, for one hour, then a further £115 hour on top while the works being done. *****. That not happening.

Just removed the two fuse's for an ecu rest for 60mins, no joy there guys, had a hell of a time starting the car back up again, but its working at lest. im gonna take the car to Lexus Twikenham on monday and see what they say and how much to rectify.

What do you think its gonna cost me?

Thanks for the advice and the help guys.. wish us luck.

See you guys there.

I tried resetting the ECU by disconecting the Battery, the car made a beeping noise, and then reconnected after 30 secs. But no change, still getting the dashboard lights on.

Any other ideas?

Im gonna try a ECU reset, i'll let you know how that goes.

Just going over some previous posts, and i checked all the fuse's, which was a bit of a tight sqeeze for a big man, but all fuse's seem to be ok.

All ideas welcome.

Dear All,

I have purchased some new tail lights from eBay, as i was fitting them all seemed fine, then i noticed that my dashboard lights have come on with he following lights staying on.

VSC OFF, VSC and the ABS light.

I have removed the new tail light housing and fit the original back, but the dashboard lights have remained lit, also i noticed the center brake light no longer comes on when i apply the brake pedal.

All other lights are working, ie indicators, reverse light and brake lights.

Please help, how do i get rid of the dashboard lights and get the rear center brake light to work again.

Many Thanks for your help.

ps. I live in the west london area, if there is anyone local i could go to help me with this would help, im not that mechanically minded.

Cheers

Dear all,

Can you guys please tell me, how do i remove the side indicator lights on my GS300 99 reg. i have bought some clear ones from e-bay. I was thinking they may twist off, but better ask first.

Many thanks.

Hello all,

I still get the noise coming slightly even with the ac off, and especialy when the car is in reverse and at low speeds. It seems to be at 500 - 700 rpm.

noise does seem to be comming from behind the dash in the footwell area.

Any ideas ?

Hello all.

I have a GS300 98+ I wish to install a new head unit, pioneer system, is there a facia plate available for my car, prehaps something with a single din or with 2 single din sizes.

Many thanks,

I live in the london area, if thats any help, or i dont mind ordering the parts of the net. please help.

Thank you.