danbak

Can anyone help? On stage 4 of the re-programming the remotes, it always locks and unlocks twice. I can't seem to get the remotes programmed.

Cheer

You could try to reprogram the remote. The procedure is as follows:

1). With driver's door open put programmed key into ignition, do not turn, then remove it.

2). Within 40 seconds:

Press LOCK and then UNLOCK on driver's door switch 5 times at 1 second intervals.

Close and open driver's door.

3). Within 40 seconds:

Press LOCK and then UNLOCK on driver's door switch 5 times at 1 second intervals.

Insert key into ignition and switch ON and OFF:

once to keep original remotes,

twice to erase original remotes.

Remove key from ignition.

System will now lock and unlock:

once if originals kept,

twice if originals erased.

4). Within 40 seconds:

Press LOCK and UNLOCK buttons on remote simultaneously for 1.5 seconds.

Within 3 seconds press any button on remote for 1 second.

Locks should then lock and unlock once.

If locks lock and unlock twice restart procedure.

5). Within 40 seconds:

Repeat step 4 for additional remotes up to a maximum of 4.

To exit programming insert key into ignition or close driver's door.

Pat

I've got exactly the same problem as this, did you ever find out what was causing it?

Cheers

I don't know if anyone has had the same problem, but the Shift Lock on my IS200 Auto doesn't release sometimes when I put my foot on the brake pedal. I have to use the override button to get it into gear.

It sounds like a faulty switch to me. Has anyone had a similar problem, if so, is it expensive to fix?

Thanks

Dan