RS Fan

guys,

see these advertised on ebay ways of programming the remote/key does anyone have this info to hand

would be intrested in making a spare in worst case senario.

Thanks

Donkammy

I think this works with an IS200... anyone know if it works on an Altezza?

"GOT THIS INFO OFF A MATE , IF YOU GET A REPLACEMENT KEY OR THE REMOTE HAS LOST ITS CODE (DEAD Battery ETC) FOLLOW THE INSTRUCTIONS BELOW . I HAVE JUST HAD TO DO IT , AND IT WORKS !!

DRIVERS DOOR OPEN AND KEY REMOVED FROM IGNITION SWITCH .

INSERT KEY INTO IGNITION SWITCH , THEN REMOVE IT .

WITHIN 40 SECONDS -

PRESS LOCK AND UNLOCK ON THE VEHICLE DOOR LOCK SWITCH AT 1 SECOND INTERVALS 5 TIMES .

CLOSE AND REOPEN DRIVERS DOOR .

WITHIN 40 SECONDS -

PRESS LOCK AND UNLOCK ON THE VEHICLE DOOR LOCK SWITCH AT 1 SECOND INTERVALS 5 TIMES .

INSERT KEY INTO IGNITION SWITCH .

SWITCH INGNITION "ON" AND "OFF" ONCE TO PROGRAM A NEW KEY CODE WHILST RETAINING THE ORIGINAL CODES OR TWICE TO PROGRAM A NEW KEY CODE WHILST ERASING THE ORIGINAL CODES .

REMOVE KEY FROM IGNITION .

*SYSTEM SHOULD NOW LOCK AND UNLOCK VEHICLE , ONCE OR TWICE DEPENDING WHICH MODE HAS BEEN SELECTED*

WITHIN 40 SECONDS -

SIMULTANEOUSLY PRESS AND HOLD KEY "LOCK" AND "UNLOCK" BUTTONS FOR A MAXIMUM OF 1.5 SECONDS .

WITHIN 3 SECONDS : PRESS ANY KEY BUTTON FOR A MINIMUM OF 1 SECOND .

NOTE --- IF SYSTEM LOCKS AND UNLOCKS TWICE VEHICLE TWICE , PROGRAMMING PROCEDURE HAS NOT BEEN COMPLETED .

NOTE --- A MAXIMUM OF 4 KEYS CAN BE PROGRAMMED .

NOTE --- TO EXIT THE PROGRAMMING MODE : CLOSE DRIVERS DOOR OR INSERT IGNITION KEY .

WELL THERE YOU GO , I HOPE IT HELPS SOMEONE OUT THERE .

GOOD LUCK .

JON . "

Same thing happened me recently and an oil change from Advanced Pitstop fixed it. Worth a try.