bb9500

Hi All.

Does anyone know if there are any instructions on how to remove

the starter motor from the gs300 on here?

Cheers

Tam

Hi Guys.

I need a new or sound second hand drive belt tensioner.

When i search on eBay for this the results come up with a part for a Land Rover

Discovery!!,this set me to wondering if they are one in the same for both vehicles,any ideas???

Thanks in advance for any useful input.

Tom.

hi guys.

wee problem with my mates 57 plate is250.

the car seems to be 'missing' when he starts the car in the morning.

also when the engine is at normal operating temp and he accelerates it is lacking in power big time.

i told him i'd put it out there in the community and see what comes back.so,if you guys have any

ideas what it could be your help would be much appreciated.

cheers guys.

tam

Hi Keith.

Thank you for the suggestion mate,i'll give that a go.

Any idea how i'd go about doing that?,lol.

Thanks Again.

Tom.

Hi Guys.

I have an awful squealing from either my power steering pump or water pump.

The problem is that i can't tell which.This is after installing a new aux drive belt.

The only indication that it may be the p/s pump is that when i spray wd40 into the pump drive

wheel the noise goes away until i drive off then the noise returns.

Any ideas would be greatly appreciated.

Tom.

hi guys.

i need some advice as to how i go about changeing the engine coolant

in my 1995 gs300,i am not very good when it comes to this type of thing

so any help that can be offered would be greatly appreciated.

thanks for your help

tom

hi guys.

i am intending a drive belt replacement on my 95 gs300.

the problem is i can't locate the tentioner to lossen the old belt

can anyone tell me where it is located please?

thanks in advance guys.

tom

hi guys.

does anyone know how to measure the outer diamiter of the exhaust on a mk1 gs300?

need this before i can buy a exhaust sleeve.

any help would be gratefully appreciated.

Tom.

Not to sure how accurate the measurement is that you need, I don’t know anything about exhaust sleeves, you could tie a piece of string tightly around the pipe, then cut it with a knife, then measure the length of sting , a bit heath Robinson I no, but would give you a rough I dear

lol.now why didn't i think of that?....doh,

cheers mate :D

hi guys.

does anyone know how to measure the outer diamiter of the exhaust on a mk1 gs300?

need this before i can buy a exhaust sleeve.

any help would be gratefully appreciated.

Tom.