mack5029

check and see if the fans come on when you switch it on

Dont know about your options on fixing it but its not to hard to change the sunroof the hardest part is getting the headlining and sunroof out the door

Dont know about your options on fixing it but its not to hard to change the sunroof the hardest part is getting the headlining and sunroof out the door

I stuck the adapter in after I had started the car and the abs light stayed off but when I stuck it in before turning the car on the abs was flashing. Going by that it looks like turning the car on then pluging her in is the way to go. Just need some where to set the phone where I can see now.

Im using the torque app with a Bluetooth obd2 adapter. VLM us your adapter Bluetooth?

Yea I plugged one in to and the same thing happened but didnt leave it in and goes out when I take it out

The light went off its self before I had a chance to take it anywhere. I have ordered a Bluetooth obd2 connector not the £70 one, will let you know how it goes

Thanks for the replies was about to take it round to get the light switched off Its self. Didnt know there was an app for that

hey. I did a service on my car is200 with 92,000miles. i changed the oil, oil filter and spark plugs. engine still seems to run fine and reving normaly and doesnt seem to be down on power. but the engine management light has come on any body any ideas?

fits straight on have it done to mine

Did you get the problem fixed? and what fixed it?

i was wondering if any body knws if coilovers from a altezza sxe10 will fit a 03 is200

the mot tester cant take anything apart on the car and you cant see the guts of a cat from the out side. i hav heard of people taking the cat apart and removing the internals putting back together and it working fine

cheers for da tip

Im just after buying an is200 se but it came with out a owners manual as i havn't owned a lexus before i dont know what most of the stuff does. I was wondering if anyone knew where I could get a owners manual? and the speedo seems to be reading low any ideas? and the mpg dial doesnt seem to be working any ideas?

is there any holes from where the badge was?