Shreksta

Thanks for part. Can now sell knowing it will stay where I park it. If you know anyone after buying is200 sport let me know

Will have a look tomorrow and get back to you. Can you in box phone number so can ring if need to arrange part

It's not been cut ? Do I need to get under car to change or can it all be done inside? Will be interested and need ASAP due to no handbrake

I've just snapped same cable tonight when pulling on steep hill. Holding by 1 thread. Thinking of using electrical joining block. What part do I need if replace because eBay just shows lhs or rhs

It could be the curcuit board button connection . Solder breaks and causes problems. Can be fixed. I bought spare buttons but curcuit was too badly damaged so had to buy new master key from lexus £160. If anyone needs 3 buttons let me know.(will need soldering to board)

Do I need a O2 simulater?????

I paid £160 at lexus Bolton

Cost me £6.

Before i had new master key made i only had 1 key and wanted a key just incase locks froze up.

If you have a sub key or copy done you will only be able to put them in door lock and ignition but if you look at master key, you will see the endge is angled inwards so I got a metal file and did the same on key from local key maker and it now works in glove box and in boot.

I bought my is200 with only 1 key which was master key but button function broke. Bought buttons to solder to board but discovered board broke so got a key cut so could open doors when frozen to minimise risk of key snapping. It worked in ignition if next to master key. I filed edges down so it also worked with glove box and boot.

After awhile of unlocking manually and no alarm I got a new master key this Thursday from lexus in Bolton at a cost of £160. They needed me to email copy of log book then they ordered key from lexus then booked me appointment to have programmed and took 10 min.

All due Friday!

It's not that bad if you have a bit of patience

Had a bit of tail kick out fun tonight onway from work more due Monday!

Try to find different supply

By the sound of it I'm going to miss owning my land rovers when snow comes!

Where is the fuse for bank 1 sensor 1? Been told could be inline fuse.

Mike you plug areal in to stereo and there is a black wire which must be linked to ignition to power areal amp . The wiring loom is put through to amp left side of glovebox. This is tricky to unplug loom from amp, you then link loom to new amp bypass kit. The autolead bypass kit needs modifying so not on constant and keeps clock illuminated, you have 2 yellow wires joined in to 1 and must disconnect 1. The red wire must be fed to a ignition source such as cigarette port.

Need 2 garage just said and a engine mount. Suspension lower on sports spec been informed!

Good long read lol. Will try shell on next full tank and reset Ecu

I use asda and tesco unleaded petrol due to cheapest in area but is there any difference to petrol from shell etc?

Can 6x9s Fit in to rear shelf and in original speaker casing. One has stopped working

You can do same by taking 2 fuses out from engine bay. For 30sec but my lights come on after 2miles so if not sorted before mot I will do this before taking it in

I was also done! Trc was flashing but thought it could be a sensor. Checked all bulbs and engine light was not present when I put bulb in what a supprise it was also lighting up. Come up as a O2 bank 1 sensor 1. Replaced this and still have same fault code and can't afford to go garage yet. Got mot end of feb