PetesBodyParts

Do I read correctly that your difficulty was when you replaced the door liner with the the Po-40 module positioned under the door handle area? Pretty tight fit there!!!

The ideal spot is under the arm rest. Replace the door liner with the Po-40 control module disconnected and the harness accessible through the hole for the window/mirror control assembly. After the liner is secure on the door, reconnect the Po-40 control module to the harness and slip it in behind the arm rest. (there is a pictorial in the installation manual)

Yes, once the novelty wears off, the enduring utility is the ability to know from distance that "indeed, the car IS locked."

Michael (MichaelR@ashpoint.com.au)

Yep, that's where i finally put it :) Main challenge was getting the door trim lined up and on without knocking off the plastic securing plugs. I had to replace all four door trimes (because of teh softening plastic issue) so had an extra long day removing and replacing!

Novelty hasnt worn off yet!

Just a quick note that it took me 30 minutes to splice and solder the wiring in. The T connector does make it very easy! Thanks again for supplying the kit Mike, and it’s cool how the mirrors now fold in and I know when the car is locked!

Biggest hassle was getting the trim off, then back on with the controller under the door handle.

Thanks again Mike!

Pete