Robin H

please close this thread I have 1 now

thanks

You have a pm

I'm looking for a motorized satnav housing from an IS or altezza. Don't need the screen working just the housing

Anyone

Meet details

Sunday the 15th of August @

Location:

The Crown Inn

Yatton Keynell,

Chippenham,

Wiltshire

SN14 7ER

Time: 12.30 onwards

click the link to find out more

My link

oops double post

I'm sorting out a UK Altezza meet, if your interested have a read of the link all input is great as we're few and far between

www.tezzaworld.com UK Meet

hahaha you on here :P

ggrrrrrrrrr

I had noticed this. It was really helpful if you need to see how the parts fitted together

check out www.tezzaworld.com for all the info on tezza's

sounds as if 1 of the bulbs has gone which could explain why there is a dull spot. You could check this by removing the cluster and swapping the bulbs about to see if the spot moves about.

This is real easy to do you need a philps screw drive and just remove the 3 screws in the plastic surround and the 3 that hold the cluster in place and you can unplug it and lift it out you may want to tilt the steering wheel down to give you more room

as for the fuel gauge you maybe able to solve this at the same time as checking the bulbs. I mad a simular problem with mine as it never went below 1/4 of a tank

I got a second hand cluster to try in mine to see if there was a problem with the cluster or if was something else I plugged the new 1 in and the fuel level was different so I plugged the old 1 back in and the fuel level went to the same place as the new 1 so I put it down to a dodge conection. so just take a note of where the gauge is before and after to see if it's changed

oooww

keep us informend I like stuff like this

my mates selling these

copy and paste into address bar

http://z10.invisionfree.com/djcc/index.php?showtopic=18728

I've got a load of blue hose connections if you click the link below in my sig

or if you need any other silicone hoses don't waste your time with prolex go straight to auto silicon hoses you can find anything you need there and there be way cheaper,

I bought about 15 different fittings of them in a range of sizes and only cost me about £80 to my door

here's a link

click me

welcome

reasons not to buy an IS200/300

From your previous cars the 200 will be under powered and the 300 has auto box

you could buy a SC IS200 ?

as for the tezza being a lower spec it's more of a sporty version being a bit lighter and with more go faster parts.

you can easily swap the interiors over

don't rule out tezzaworld as there is a massive knowledge base on there with members all over the world and a lot from the uk

Hi there :)

I would take the rim off and just double check the off set

they should fit in fine as there is other members running 18x8's with a 35et and not having a problem

have you got a side on pic of the car

did you get the problem sorted

do you have the TRD clocks or the later spec Altezza clocks

mr peeps has just done this on his altezza so maybe try giving him a pm ?

No

just paint them and put a nice lexus decal on them

yes you should get it checked ASAP

there is obviously a problem if the wheel now rubs !!!

could be a buckled wheel or more serious suspension problems

don't drive the car until you can get it looked at

the fibre glass 1's will crack if you hit something hard where as the toyota 1's just flex

Japspeed are selling the exact same system for £299

link

will you not need your old exhaust system to get it through the UK SVA test when you bring it over, as the car was fitted with a cat straight out the factory so it may need 1 fitted when going throught the test