-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Gallery
Tutorials
Lexus Owners Club
Gold Membership Discounts
Lexus Owners Club Video
News & Articles
Posts posted by mikegarth
-
-
Hey everyone I need your help in locating a Camshaft for my 93 lexus GS300. It is the driver side camshaft (DOHC) Used will be ok I seem to have broken mine. Any help is welcomed.
-
ok ,so lets get the codes up,Get a bridge wire and bridge TE1 TO T1, THEN CHECK THE CODE.Do the same with TE1 TO E1, AND READ THE CODE. :D
That's what I am trying to explain it only blinks every 1 second and never stops. There are no codes stored anymore. I went thru those tests but I will try again as soon as we have breakfast and feed the kids. ok.
That test checks all your systems, and u not getting a feed back, look at your ECU conections,I think its under the seat.
My only concern is that the Battery was disconected and I think it erased the codes from the (ECU) I will try getting the codes doing the procedure you detailed . I will let you know. Thank you againg for all of your help.
-
ok ,so lets get the codes up,Get a bridge wire and bridge TE1 TO T1, THEN CHECK THE CODE.Do the same with TE1 TO E1, AND READ THE CODE. :D
That's what I am trying to explain it only blinks every 1 second and never stops. There are no codes stored anymore. I went thru those tests but I will try again as soon as we have breakfast and feed the kids. ok.
-
Hi ,this is the engine the book comes up with 7MGE, JUST CHECK IF IT SAME.Also look at the back of your diagnostic cover and check if u have TE1,T1,E1.TERRY.
CHECK ENGINE eg[4AJE]U WILL FIND IT ON CAM BELT COVER OR ON ENGINE PLATE,
Under the bonet,the panel of fuses,read the under side,the IGN FUSE 15AMP,To get the codes up ,connect a wire from your diagnostic plug B1To B3, ANDyour codes come up[if u unable to get them up ,check the hand book or w/shop manual]I'm back to work Thursday next week, iwill check it out ,and let u know TERRYMy check engine light was coming on every once in a while but since then I had run the battery down and when I do the sefl diagnostic it just blinks no codes.How many times.THE BLINKING IS THE CODE.The codes come up if the eng over heats, low oil in eng and g/box,and air flow,
Th car light will blink on and off without ever stopping to tell you the system is opperating correctly that is the only code I get. The car has enough oil and didn't overheat. The only hint I have is another poster I saw a little bit ago that says that The Throttle Possition Sensor controls gas shutoff and stuff like that so I figured maybe that might be it but with out the codes it is extremly hard to diagnose
OK,Take out the main 15amp fuse, [for10 sec]refit ,then count how many blinks.The blinks should be about 1 sec apart.any blinks longer than 1sec is the next code and so on,eg[4 blinks then2 sec later5 blinks]the code would be 4.5 ,so count every sec until it repeats.your throttle pos sensor work off your air flow sencor and will bring up a code.[when 15amp fuse is removed ,it clears the faults] also check your exhaust sencor because that also works with the throttle sencor.hope this helps.TERRY
Terry I thank you for all the help. The light blinks one second apart forever neverchanges i have counted it all the way up to 200 blinks and no change. 1 second apart. What main 15 amp fuse are you refering to???
Please let me know what engine u have so that i can get all the codes.
I have the 3.0 DOHC Strait 6. Thanks again.
It is and I do...Those are the same terminals I have been using.
-
CHECK ENGINE eg[4AJE]U WILL FIND IT ON CAM BELT COVER OR ON ENGINE PLATE,
Under the bonet,the panel of fuses,read the under side,the IGN FUSE 15AMP,To get the codes up ,connect a wire from your diagnostic plug B1To B3, ANDyour codes come up[if u unable to get them up ,check the hand book or w/shop manual]I'm back to work Thursday next week, iwill check it out ,and let u know TERRYMy check engine light was coming on every once in a while but since then I had run the battery down and when I do the sefl diagnostic it just blinks no codes.How many times.THE BLINKING IS THE CODE.The codes come up if the eng over heats, low oil in eng and g/box,and air flow,
Th car light will blink on and off without ever stopping to tell you the system is opperating correctly that is the only code I get. The car has enough oil and didn't overheat. The only hint I have is another poster I saw a little bit ago that says that The Throttle Possition Sensor controls gas shutoff and stuff like that so I figured maybe that might be it but with out the codes it is extremly hard to diagnose
OK,Take out the main 15amp fuse, [for10 sec]refit ,then count how many blinks.The blinks should be about 1 sec apart.any blinks longer than 1sec is the next code and so on,eg[4 blinks then2 sec later5 blinks]the code would be 4.5 ,so count every sec until it repeats.your throttle pos sensor work off your air flow sencor and will bring up a code.[when 15amp fuse is removed ,it clears the faults] also check your exhaust sencor because that also works with the throttle sencor.hope this helps.TERRY
Terry I thank you for all the help. The light blinks one second apart forever neverchanges i have counted it all the way up to 200 blinks and no change. 1 second apart. What main 15 amp fuse are you refering to???
Please let me know what engine u have so that i can get all the codes.
I have the 3.0 DOHC Strait 6. Thanks again.
What is eg[4AJE]?? you mean look for the the engine id number???
-
Under the bonet,the panel of fuses,read the under side,the IGN FUSE 15AMP,To get the codes up ,connect a wire from your diagnostic plug B1To B3, ANDyour codes come up[if u unable to get them up ,check the hand book or w/shop manual]I'm back to work Thursday next week, iwill check it out ,and let u know TERRYMy check engine light was coming on every once in a while but since then I had run the battery down and when I do the sefl diagnostic it just blinks no codes.How many times.THE BLINKING IS THE CODE.The codes come up if the eng over heats, low oil in eng and g/box,and air flow,
Th car light will blink on and off without ever stopping to tell you the system is opperating correctly that is the only code I get. The car has enough oil and didn't overheat. The only hint I have is another poster I saw a little bit ago that says that The Throttle Possition Sensor controls gas shutoff and stuff like that so I figured maybe that might be it but with out the codes it is extremly hard to diagnose
OK,Take out the main 15amp fuse, [for10 sec]refit ,then count how many blinks.The blinks should be about 1 sec apart.any blinks longer than 1sec is the next code and so on,eg[4 blinks then2 sec later5 blinks]the code would be 4.5 ,so count every sec until it repeats.your throttle pos sensor work off your air flow sencor and will bring up a code.[when 15amp fuse is removed ,it clears the faults] also check your exhaust sencor because that also works with the throttle sencor.hope this helps.TERRY
Terry I thank you for all the help. The light blinks one second apart forever neverchanges i have counted it all the way up to 200 blinks and no change. 1 second apart. What main 15 amp fuse are you refering to???
Please let me know what engine u have so that i can get all the codes.
I have the 3.0 DOHC Strait 6. Thanks again.
-
My check engine light was coming on every once in a while but since then I had run the battery down and when I do the sefl diagnostic it just blinks no codes.
How many times.THE BLINKING IS THE CODE.The codes come up if the eng over heats, low oil in eng and g/box,and air flow,
Th car light will blink on and off without ever stopping to tell you the system is opperating correctly that is the only code I get. The car has enough oil and didn't overheat. The only hint I have is another poster I saw a little bit ago that says that The Throttle Possition Sensor controls gas shutoff and stuff like that so I figured maybe that might be it but with out the codes it is extremly hard to diagnose
OK,Take out the main 15amp fuse, [for10 sec]refit ,then count how many blinks.The blinks should be about 1 sec apart.any blinks longer than 1sec is the next code and so on,eg[4 blinks then2 sec later5 blinks]the code would be 4.5 ,so count every sec until it repeats.your throttle pos sensor work off your air flow sencor and will bring up a code.[when 15amp fuse is removed ,it clears the faults] also check your exhaust sencor because that also works with the throttle sencor.hope this helps.TERRY
Terry I thank you for all the help. The light blinks one second apart forever neverchanges i have counted it all the way up to 200 blinks and no change. 1 second apart. What main 15 amp fuse are you refering to???
-
My check engine light was coming on every once in a while but since then I had run the battery down and when I do the sefl diagnostic it just blinks no codes.
How many times.THE BLINKING IS THE CODE.The codes come up if the eng over heats, low oil in eng and g/box,and air flow,
Th car light will blink on and off without ever stopping to tell you the system is opperating correctly that is the only code I get. The car has enough oil and didn't overheat. The only hint I have is another poster I saw a little bit ago that says that The Throttle Possition Sensor controls gas shutoff and stuff like that so I figured maybe that might be it but with out the codes it is extremly hard to diagnose
-
My check engine light was coming on every once in a while but since then I had run the Battery down and when I do the sefl diagnostic it just blinks no codes.
-
HI there I am new to this forum looking for help with my 1993 GS300. Here's the story. I was getting onto the freeway about 2 weeks ago and gassing it to get around another slower vehicle. As I started to excelerate the car just died as if the engine only lost gas feed or something. Now I am unable to start or drive for that matter the car. I so far have checked for spark (good), I am getting gas as far as I can tell, and checked all fuses and links (good), I have also taken the alternator out and taken it to be tested (good). I am at my wits end. Please if someone else has had this or a similar problem give me some ideas to steer me in the right direction. Thanks.
HI, just have a few mins,try to check your cam belt teeth,or your timing pick up sensor.
The cam teeth look ok and the belt all looked ok now I would just have to locate the timing sensor. Is it located in the distributor or on the timing belt case it self???
-
HI there I am new to this forum looking for help with my 1993 GS300. Here's the story. I was getting onto the freeway about 2 weeks ago and gassing it to get around another slower vehicle. As I started to excelerate the car just died as if the engine only lost gas feed or something. Now I am unable to start or drive for that matter the car. I so far have checked for spark (good), I am getting gas as far as I can tell, and checked all fuses and links (good), I have also taken the alternator out and taken it to be tested (good). I am at my wits end. Please if someone else has had this or a similar problem give me some ideas to steer me in the right direction. Thanks.
I Need A Camshaft
in Lexus GS 300 / Lexus GS 250 / Lexus GS 430 / Lexus 450h / Lexus GS 460 Club
Posted
Hey everyone I need your help in locating a Camshaft for my 93 lexus GS300. It is the driver side camshaft (DOHC) Used will be ok I seem to have broken mine. Any help is welcomed.