SParkyWar

Yeah...can't be more than stage 1

Yeap I was dreaming when I was writting my post (STAGE 2 ? hummm maybe later I'm getting married)

Tkank for the correction fluff and morse

The dyno on the site is the one from my car.

And yes I had a bigger Intercooler mounted.

What have had done for stage 2 ?

Hello,

oups forgot to post the link here it is :

Stage 1 Details

Gretz

Hello,

here is the dyno of my IS, modified by Kempower in Belgium.

I didn't found many IS200 Dyno's so Please comment this one.

Gretz.

SparkyWar

Hello,

I need your help I need to reduce the noise of my HKS Silent Hi-Power to pass the technical inspection here in Switzerland where the max dB(A) is 74 .

As someone tried this part found on HKS USA website ?

Inner Muffler Silencer

P/N: 3306-RA076

Thank you.

SParkyWar

Ohhhh I will need to drill on the Tail tip

I was thing of a part that can be installed just at the junction of the back-box and the cat, to reduce the diameter.

Just like this one :

Apex'i ECV

Thank you.

Hi,

the point is Bemani compressor mounted and certified -> Ok.

HKS Silent Hi-Power mounted but I will need to pass a noise level test, so i'm looking for a way to be sure that I will pass that test else I will need to reinstall my stock exhaust and re-pass the test and as you could expect it's not free, they ask 300 Swiss franc per test.

So if there is a way to reduce the noise level just for the test that's what I'm looking for !

Hi, fluff

anyway I need to pass the noise with or without papers because I have the compressor Installed. The specialist here says since the car is modificated I need to pass that test.

Wait and see !

Hi,

DAZA -> I must have the same noise level that stock exhaust at 1dB near

Fluff -> It's for certification I have no papers with my HKS Silent Hi-Power

jdmparts_guru -> I don't think so ! Where can I have one and how much ?

Thank you for all your answers.

Hi,

Here can I have that part ?

Hello,

can someone help me reducing the noise level of a HKS Silent Hi-Power so I can pass a noise test that is mandatory here in Switzerland.

Any ideas ?

Thank you.

I think its best going back to the people who did it.........i understand that TDI are the only ones, well who i know who can do the f-con pro.

plus, it would be nice for mark to see it REALLY clean :D

Hi mat

There is someone else that can do the job and he is closer to your location I think.

this is website :

Kempower

He just finished installing he's new 4WD Dyno.

I had some e-mails with kempower and they are really cool.

Greetings.

Hello,

some update ....

Dark_is was right i was the Belt slipping B)

Thank you all for your input .

Case closed .

Hi,

Bemani does the 205bhp directly now, and it's street legal for switerland.

The fact is that in Switzerland you can improve by 20% the horse power without having to passe a all bunch of tests.

Now that Bemani has got one of is modified cars to have all the tests done the standard horse power is 205bhp.

Fluff, if you want to contact Bemani i should have an e-mail addresse somewhere just PM me to have it .

Friday i will have the 45'000Km Service done ... so they will check the compressor belt ... modifing the cable setting didn't change anything.

Thank you.

ok,

so i have check my spring i have the old one

but the thing is i have a Bemani Kompressor not TTE so i can not request TTE to send me the new spring ...

I will check with Bemani to see if they have the new spring kit.

Thank you for all your help.

Thank you all for all this replies !!!

Fluff i'm in lausanne that's right ...

The air sound is the same as when you change gear at high rpm's (near the rev limiter).

I will check all the springs later this afternoon.

Hello,

can someone help me ?

Here is my problem with my IS200 S/C when i get around 5'000rpm I start earing the air bypassing and a lose power .... how can i fix that ? Is this the problem with the return spring ??

Many tanks

Hello,

can someone tell me if the HKS Anti-Roll bars come with some paperwork from Lexus/Toyota or HKS that certify that a security test conformity test has been passed ... because here in Switzerland they request that sort of papers so i can pass the techincal inspection.

Many Thanks.

Hello,

as someone tried the HKS Anti-Roll Bars ?

Are they better that the TTE ones ?

Thank you.

Hi Si

We found out recently (on Grims car) That when you change the manifold the mixture strength is very lean.

To overcome this you will need the fuel line/pump/tank/regulator upgrade at the very least. If you want the stage 1 boost upgrade a Unichip or Emanage or similar will just about do but you would be better off with Motec, HKS or similar.

Best regards

Mark  :)

So is it right if i don't have the manifold upgrade i don't need a new fuel line ?

Froomer

It will normally be ready the 4th october .... :D

Can you help find a chep crossing Please..

I will fly

from Gatwick -> Geneva

And

from Geneva -> Luton

I had no choice

Froomer

Having Stage 1 Boost

I keep on getting always the same prices !!

I'am maybe :iraqi-info-minister: or I have just to have a good night sleep ? :winky:

What I want to do is drive my car to TDI and the same day take a flight back to switzerland and one week after take a flight to england and drive my car to Switzerland