Joe.L

I have the 2001 lexus is 200 se, on my wiring loom: The +12v ignition cable is grey, 12v battery is blue/yellow ground is brown Speaker cables: +/- Front right=green/blue Front left=purple/pink Rear right=red/white Rear left=black/yellow Although am not sure if your wiring will be the same as mine

Thanks Stav, the plates will be going back in soon as possible, i threw my template out . If you look in the boot behind the seats there is a plastic covering attached to the back of them. It is nearly the exact size but a bit of cutting is required for an exact fit. http://i1012.photobucket.com/albums/af248/jefweezy/card.jpg

Hi this is my install nearly finished just a bit of tuning and tidying up to do. Equipment as follows Headunit: Alpine CDA 9887R Front end: Hertz MLK2 Amp: Hertz HP4 Sub:hertz Mille 2500 Processor:Audison Bit One Facia&Harness: Celsus ice Cables: Audison Carnival silver screen & Audison power cables RCA: Audison Sonus rear fill: NONE= removed 6x9's to allow bass in to car First i removed the stock amp and connected the harness adaptor. If you look in the background you will see the cable i managed to feed through the wiring loom and in to the door cavity. http://i1012.photobucket.com/albums/af248/jefweezy/harness.jpg http://i1012.photobucket.com/albums/af248/jefweezy/facia.jpg http://i1012.photobucket.com/albums/af248/jefweezy/bitone.jpg i made replica a pillars from material and fibreglass resin so i didnt mess the originals up. http://i1012.photobucket.com/albums/af248/jefweezy/pillar.jpg http://i1012.photobucket.com/albums/af248/jefweezy/L1020266.jpg After i found the best tweeter angle i mounted the baffle and filled the gaps with body filler. I found my material at my local market for £5 a metre. http://i1012.photobucket.com/albums/af248/jefweezy/tweet.jpg http://i1012.photobucket.com/albums/af248/jefweezy/L1020275.jpg http://i1012.photobucket.com/albums/af248/jefweezy/L1020278.jpg Doors fully dynamatted inside and out. made baffles from 2 pieces of 12mm bonded together with resin and filler and bolted them to the door skin. http://i1012.photobucket.com/albums/af248/jefweezy/door.jpg http://i1012.photobucket.com/albums/af248/jefweezy/front.jpg If you look at the holes either side of the subwoofer you will notice i have removed the 2 steel plates, to allow cables in to boot and bass in to car. http://i1012.photobucket.com/albums/af248/jefweezy/bkseat.jpg I made a template from mdf that fitted between the wheel arches It was mounted on to my sub box and the whole thing secured with brackets and self tapping screws. I have some room left in my boot and i have access to my spare wheel http://i1012.photobucket.com/albums/af248/jefweezy/L1020282.jpg http://i1012.photobucket.com/albums/af248/jefweezy/L1020285.jpg http://i1012.photobucket.com/albums/af248/jefweezy/L1020281.jpg