-
Posts
784 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Gallery
Tutorials
Lexus Owners Club
Gold Membership Discounts
Lexus Owners Club Video
News & Articles
Posts posted by Dimitris Papamichail
-
-
The OEM gerabox mount was replaced by the TRD. After 140000 km the OEM rubber mount of the gearbox looked that it needed to be replaced with a new one. The new gearbox mount is listed in the TRD list that fits only the Altezza-SXE10 models but it fits ok on the IS200 series with no modifications. Straight swap.
After fitment there was no vibration in the cabin and during gear changes the small kicks that existed with the OEM mount had dissapeared. I also had the feeling that the gears change better now, but that could be only my impression. -
It is a real TTE bumper
-
All those things are great, but if the calipers are shot will make no difference at all.
I'll get it done and report back when i've finished
Hi, I have already supra calipers on my Lexus and I can tell you there will not be any benefit if you have not done any major upgrades to your car, unless if you use in track oftern or brake hard continuously from 100mph! Supra calipers are great but not worh with no power upgrades. OEM brakes are very good especially if you follow the suggestions above. Bear in mind the supra calipers are quite bulky so you will need spacers or wheels with an ofset near 30
-
If you tempt to stay OEM, it is better to upgrade your discs, pads, brake lines and brake fluid. no need to go for big brake kit. It is waste of money.
-
Dude you are a whole wealth of knowledge and I am pleased to call you my friend, thank you very much. Are you still looking for a TTE airbox??
Thanks, do you have one for sale?
-
From what car bud?? Reason im asking is I am going 160mm pulley and greddy ultimate and I am wondering if the injectors I have are up to the job. They are 250cc I believe, but I want to be on the safe side and not run lean.
Cheers Pete
Hi, if you are going to fit a 160mm pulley then 250cc will not be enough for the power you are aiming. You need at least 330cc. Go for the brown injectors from the USA 2zzge or the ones i have. They are from a 2.4 RAV4.
-
Hi there is a member at OJC who might be able to help you. He is offering his cradle to be copied
-
No they are bigger, they are 375cc
-
Hi Pete, I got the wiring harness from eBay
-
you have pm
-
Ok the big day came. I took the car today to the mapper....and the result? 9.5psi boost and 235whp and 28kg of torque. The AFR when the water/meth kit is working is 11.9-12.4.
I believe now I have the most powerful Lexus IS200 with a TTE SC kit fitted in Europe. -
New updates. We fitted the upgrade parts. First we fitted the 375cc injectors, relocated the steering wheel bottle, installed the water/methanol kit and lastly the 160mm pulley with the 5PK583 belt. I believe this is the correct belt size. It was already too tight before using the cradle belt tensioner. Next step is now to arrange this week to have the car remapped and see what the performance output will be. Driving back home I had the meth kit disengaged (wait until the car is remapped), but up to 4500rpm the boost gauge showed me 8psi! I did not push it further want the engine safe until the upgrade has finished. Happy with the result though. Here are some pictures of today's work.
-
As Stav says 1ZZ or 2ZZ injectors will fit with no mods.
-
have you checked euro loc, there is one for sale now
-
Fitted the new TTE Compressor badges today. The quality is very good. What do you think? Does it look nice?
-
Did a service today to the car. Changed the oil and fitted new Torco SR-1 oil. Also fitted the new short HKS oil filter. As you see from the pic the space is limited with the sandwich plate so there is no other option than fit this size of filter.
-
Looking super good buddy!! Is the dyno reading before or after fitting the new pistons and rods can i ask? sorry if this has been covered had to sneak on at work so not had chance to have a proper read!! :)
The dyno readings are with OEM pistons and rods
-
I took some better pictures of the car today with the new body kit.
-
I got a set of TTE Compressor badges from Tony. Thanks mate.
-
-
Hi and welcome to the club, check my project thread for more power!
-
Here is a new small toy I got from my mechanic. It is an oil cooler from a Lexus RH400h. I am thinking to swap my small Mocal oil cooler with this one and use the other for the steering oil line. The only thing that I do not know is how much the oil pressure will drop with the larger cooler.
-
Today I fitted almost all the new parts on the car. Firstly we changed the front bushes. As you see from the photo the front bush is damaged after 125,000km so I presume it will be a good idead to have a look at your bushes too. Removing the oem bushes was not an easy job. It requires a map gas, a chesil and a hummer.
Pic of the faulty old coilover and the Megan Racing Bars.
New TRD bush fitted on the bar.
Coilover and Megan Racing parts fitted on the car.
Also the bushes of the rear oem traction rods were damaged...check this bushes too.
Front coilover fitted on the car.
-
Here are the pics of the TRD bushes. You can also see the part numbers for anyone who wants to order a same set.
More Work Being Done
in Supercharging & Turbo Modifications
Posted
Very nice Lexus mate, with nice parts