Do Not Sell My Personal Information Jump to content


gribley

Members
  • Posts

    6
  • Joined

  • Last visited

 Content Type 

Profiles

Forums

Events

Store

Gallery

Tutorials

Lexus Owners Club

Gold Membership Discounts

Lexus Owners Club Video

News & Articles

Everything posted by gribley

  1. The aircon may not be a problem, systems lose pressure over time due to the very small gas molecules being able to seep through rubber hoses. If its not been re gassed for 3 or 4 years its probably short on gas. Slow to cool down and not getting as cold as it should are signs of low gas.
  2. I thought I would pass on this information concerning Mk1 LS400s My 1990 ls400 wasnt anything like cold. The refrigerant gas is R12 which is now banned. I read about getting a R134a retrofit but it seems that there are problems with this conversion, far from ideal. I then spoke to Air conditioning northwest 01925 762328. There is a "drop in" replacement for R12 called RS24, it uses the same lubricant, seals, everything. Its just a case of pump out the old gas and in with the new. its a lot more expensive than R134a but the guy came to my workplace to do the job and my air-con is ice cold now. £65-00 I'm happy
  3. Ive done the sat nav bit, speedo reading 76 @ 70, 54 @ 50 so its approx 8% fast If Iknock off the 1.5% for worn tyres I'm still reading 6.5% fast
  4. I am looking towards putting 17" wheels on my Mk1 LS400 With the std well worn tyres my speedo is reading about 8% fast. New tyres would be about 1.5% better ie 6.5% fast If I fit 225/50/17 (+1.4%) speedo would be 5% fast If I fit 225/55/17 (+5%) speedo would be 1.5% fast If I fit 235/50/17 (+3%) speedo would be 3.5% fast Would there be any problem using any of the above tyres My rims are GS300 10 spokes 7.5" x 17"
  5. Hi all. Can anyone tell me the depth from the outside of the front disc to the outside of the caliper on post '95 ls400 with 4 pot calipers. I need to know so i can measure up to find some wheels to fit when i upgrade my '90 ls400 cheers Andy
×
×
  • Create New...